Impact of waste fuels (virgin/waste wood, mixed biofuel (peat, bark, wood chips) industrial, household, mixed waste fuel) and incineration technologies on partitioning and leaching behavior of trace elements has been investigated. Study included 4 grate fired and 9 fluidized boilers. Results showed that mixed waste incineration mostly caused increased transfer of trace elements to fly ash; part...

A storage pond dike failure occurred at the Tennessee Valley Authority Kingston Fossil Plant that resulted in the release of over 3.8 million cubic meters (5 million cubic yards) of fly ash. Approximately half of this material deposited in the main channel of the Emory River, 3.5 km upstream of the confluence of the Emory and Clinch Rivers, Tennessee, USA. Remediation efforts to date have focus...

Ball milling is investigated as a method of reducing the leaching concentration (often termed stablilization) of heavy metals in municipal solid waste incineration (MSWI) fly ash. Three heavy metals (Cu, Cr, Pb) loose much of their solubility in leachate by treating fly ash in a planetary ball mill, in which collisions between balls and fly ash drive various physical processes, as well as chemi...

The use of fly ash is not only in harmony with the concept of sustainable development, but also beneficial to some mechanical properties of concrete. This paper discusses steel corrosion rate time-changing law in concrete with different replacing ratios of low calcium fly ash(10%~30%) and the microcosmic characteristic of concrete-steel interface. The steel corrosion rate was tested by linear p...

Emission of CO2 from different sources has increased the effect of green house gases and global warming. Fixation of CO2 from atmosphere in the form of solid carbonates appears to be an option for reduction of CO2 concentration. Mineral carbonation is a process of chemical reaction in which minerals or its residues consisting of lime and magnesia become a source of carbonation. The material fly...

This study investigates the feasibility of using coal fly ash and fly ash-bentonite mixtures as a barrier material for mine waste. The hydraulic conductivity of the coal fly ash was measured to be in the order of 2 x 10 -9 m/s when it was permeated with deionized water, and this value decreased significantly when the permeant was switched to acid mine drainage (AMD). Addition of bentonite to co...

The objective of this paper is to examine the possible use of new blended cements containing calcareous fly ash in structural concrete, potentially adequate for structural elements of nuclear power plants. The investigation included five new cements made with different contents of non-clinker constituents: calcareous fly ash, siliceous fly ash, ground granulated blastfurnace slag, and a referen...

Background: Municipal solid waste incineration (MSWI) bottom ash contains a not insignificant amount of metallic aluminum, while circulating fluidized bed combustion (CFBC) fly ash is rich in active SiO 2. To reduce the materials cost of autoclaved aerated concrete (AAC) production, these two types of solid waste could theoretically be used as the aerating agent and silica source, respectively....

Processing of pine wood chips in a pilot-scale downdraft gasifier generated a carbon-rich fly ash as a byproduct. Studies on biomass-derived fly ashes have generally focused on their direct characterisation, as generated, to develop options for utilisation or disposal. Analogous to studies on coal-derived fly ashes, strategies were applied here to assess the feasibility of isolating chars for v...