Failure of the quay walls due to earthquakes results in severe economic loss. Because of hazards threatening such inexpensive nodes of national and international transportation networks, seismic design of quay walls is still an evolving topic in marine structural engineering. This study investigates the sensitivity of the gravity-type quay wall stability respect to uncertain soil and seismic pr...

Strain distribution of Al 1100 was numerically investigated during cyclic expansion extrusion (CEE) process using finite element method (FEM). Die angle, corner fillet radius and die chamber diameter were considered as die parameters and friction factor and number of passes as process parameters. The effects of these parameters were investigated on the effective strain and strain homogeneity in...

Waste fibers produced from manufacturing processes are a byproduct commonly deposited in storing yards and/or landfills and thus results in many serious environmental problems in Iran. If these waste materials could be advantageously put to practical use in any application, it would reduce the burden on the environment and landfills. This paper compares the performance of the stone matrix aspha...

In this paper experimentally, the friction-stir welding of the polypropylene sheets with 40% glass fiber has been investigated. Comparison to other welding methods, the strength of the joint is the most important feature in this process. Many parameters such as tool geometry, rotational speed, linear velocity, and tilt angle are very important as input parameters in this type of welding. Theref...

In this paper experimentally, the friction-stir welding of the polypropylene sheets with 40% glass fiber has been investigated. Comparison to other welding methods, the strength of the joint is the most important feature in this process. Many parameters such as tool geometry, rotational speed, linear velocity, and tilt angle are very important as input parameters in this type of welding. Theref...

Calculation of lateral earth pressure on retaining walls is one of the main issues in geotechnics. The upper and lower bound theorems of plasticity are used to analyze the stability of geotechnical structures include bearing capacity of foundations, lateral earth pressure on retaining walls and factor of safety of slopes. In this paper formulation of finite element limit analysis is introduced ...

The aim of the present study is to determine the feasibility of making a rectangular twist waveguide used to rotate electromagnetic waves. For this purpose, the process of fabricating an aluminum rectangular twist waveguide was simulated by making use of finite element method and Deform software. The optimum length and angle of the twist die for manufacturing a twist waveguide with inner cross ...

In this paper, the mechanical behavior of plastic concrete being used in the cut-off walls of earth dams has been studied. To do the task, triaxial compression tests on the specimens in various ages and mix designs under different confining pressures have been done and the stress-strain behavior of such materials and their strength parameter changes has been experimentally investigated. It has ...

Light scattering was used to measure the time-dependent loss of air entrapped within a submerged microporous hydrophobic surface subjected to different environmental conditions. The loss of trapped air resulted in a measurable decrease in surface reflectivity and the kinetics of the process was determined in real time and compared to surface properties, such as porosity and morphology. The ligh...