an agricultural waste i.e. rice husk has been used as a cheap adsorbent for the removal ofleadas a harmful heavy metal from contaminated water via adsorption. the adsorption capacity of rice husk was calculated by equilibrium models. the results showed that the adsorption process has the best accordance with langmuir model. the kinetics of the adsorption was also investigated and obtained that ...

Phosphate removal is important in the control of eutrophication of water bodies and adsorption is one of the promising approaches for this purpose. A Fe-Mn binary oxide adsorbent with a Fe/Mn molar ratio of 6:1 for phosphate removal was synthesized by a simultaneous oxidation and coprecipitation process. Laboratory experiments were carried out to investigate adsorption kinetics and equilibrium,...

The potential to remove chromium(VI) from aqueous solutions through biosorption using coffee husk was investigated. The effects of pH, contact time, initial concentration and adsorbent dosage on the adsorption of Cr(VI) were studied. The data obeyed Langmuir and Freundlich adsorption isotherms. The Langmuir adsorption capacity was found to be 44.95 mg/g. The Freundlich constants Kf and n were 1...

This work aims to study the removal of Cu(II) and Cr(VI) from aqueous solutions with commercial coffee wastes. Materials with no further treatment such as coffee residues from café may act as adsorbents for the removal of Cu(II) and Cr(VI). Equilibrium data were successfully fitted to the Langmuir, Freundlich and Langmuir-Freundlich model (L-F). The maximum adsorption capacity of the coffee res...

This study was focused on nettle ash as an alternative adsorbent for the removal of nickel (II) and cadmium (II) from wastewater. Batch experiments were conducted to determine the factors affecting adsorption of nickel (II) and cadmium (II). The adsorption process is affected by various parameters such as contact time, solution pH and adsorbent dose. The optimum pH required for maximum adsorpti...

A sorption study was conducted on different soils collected from five agroecological zones of West Bengal, India, to understand the soil environmental behavior and fate of cadmium. For this purpose batch adsorption experiments were carried out at the native soil pH and at three different temperatures (25°C, 35°C, and 45°C). The adsorption data fitted by a linear least squares technique to the d...

Zinc (Zn) availability and mobility in soils is controlled by its interaction with the soil matrix and amendments. Contradicting evidence has been reported for factors influencing Zn behavior in soils. The aim of this study was to investigate the Zn sorption in selected acid, calcareous and gypsiferous soils with different background electrolytes (Na+, K+ and H2PO4, NO3 and Cl backgrounds). Iso...

Batch sorption experiments were carried out to remove As(III) from aqueous solution by using iron based commercial adsorbent Bayoxide. The effects of various experimental parameters, such as initial concentration, contact time and solution pH on the adsorption of As(III) on adsorbent was investigated. The adsorption density increased with increased initial arsenic concentration and contact time...

Introduction: Dyes have complicated structures, they are usually toxic and resistant to biological treatment and enter the environment through industrial waste streams. The aim of this study was to review the isotherm and kinetic adsorption studies of Reactive Blue 19 (RB19) dye onto Jujube stems powder from synthetic textile wastewater. Materials and Methods: This study was conducted in labo...

Hydroxyapatite nanocrystals were synthesized by sol-gel combustion method for the sorption ofHg(II) ions from aqueous solutions. The effects of varying parameters such as pH, temperature, initialmetal concentration, and contact time on the adsorption process were examined. Adsorptionequilibrium was established in 360 minutes and the maximum adsorption of Hg(II) on thehydroxyapatite was observed...