Zero-net mass-flux jet based control of flow separation over a stalled airfoil is examined using numerical simulations. Two-dimensional simulations are carried out for a NACA 4418 airfoil at a chord Reynolds number of 40,000 and angle of attack of 18 deg. Results for the uncontrolled flow indicate the presence of three distinct natural time scales in the flow corresponding to the shear layer, s...

Compressible large-eddy simulations of turbulent flow over a wall-mounted hump with active flow control are performedand comparedwithprevious experiments. Theflow is characterizedby the unsteady separationbefore the steep trailing edge, which naturally reattaches downstream of the hump to form an unsteady turbulent separation bubble. The lowMachnumber large-eddy simulation demonstrated a goodpr...

Separation of two categories of cells in pinched flow fractionation(PFF) device is simulated by employing IB-LBM. The separation performances at low Reynolds number (about 1) under different pinched segment widths, flow ratios, cell features, and distances between neighboring cells are studied and the results are compared with those predicted by the empirical formula. The simulation indicates t...

Shock waves generated at different parts of vehicle interact with the boundary layer over the surface at high Mach flows. The adverse pressure gradient across strong shock wave causes the flow to separate and peak loads are generated at separation and reattachment points. The size of separation bubble in the shock boundary layer interaction flows depends on various parameters. Reynolds-averaged...

Hydrocyclones have been used as an operational tool to separate liquids from solids in different industries for more than 50 years. Considering the importance of this issue, many experimental and numerical attempts have been made to estimate the performance of this tool regarding the resulting pressure drop and the separation efficiency (particles separation limit diameter...

Surface dielectric barrier discharges (DBDs) are used to delay flow separation behind a bluff body in atmospheric pressure air. The bluff body is made by connecting a flat plate to a half cylinder tangentially as a round-cornered trailing edge. Four DBD plasma actuators are attached along the surface of the half cylinder. Particle Image Velocimetry (PIV) is utilized for studying the velocity fi...

Single dielectric barrier discharge plasma actuators have been used to control flow separation in a large number of applications. An often used configuration involves spanwise-oriented asymmetric electrodes that are arranged to induce a tangential wall jet in the mean flow direction. For the best effect, the plasma actuator is placed just upstream of where the flow separation will occur. This a...

Insulator-based dielectrophoresis (iDEP) is a powerful technique for separation and manipulation of bioparticles. In recent years, iDEP designs using arrays of insulating posts have shown promising results toward reaching high-efficiency bioparticle manipulation. Joule heating (JH) and electrothermal (ET) flows have been observed in iDEP microdevices and significantly affecting their performanc...