STATEMENT OF THE PROBLEM Sufficient adhesion between silorane/methacrylate-based composites and methacrylate impregnated glass fiber increases the benefits of fibers and enhances the mechanical and clinical performance of both composites. PURPOSE The aim of this study was to evaluate the compatibility of silorane and methacrylate-based composites with pre-impregnated glass fiber by using flex...

A functionally graded (FG) material system is employed to make fiber use more efficient in a fiber reinforced cement composite (FRCC). This preliminary study demonstrates beam elements that were functionally graded fiber reinforced cement composite (FGFRCC) with four layers, each with a different fiber volume ratio. Fiber volume ratio was graded in accordance with its potential contribution to ...

We present measurements of the low-temperature thermal conductivity of a number of polymeric and composite materials from 0.3 to 4 K. The materials measured are Vespel SP-1, Vespel SP-22, unfilled PEEK, 30% carbon fiber-filled PEEK, 30% glass-filled PEEK, carbon fiber Graphlite composite rod, Torlon 4301, G-10/FR-4 fiberglass, pultruded fiberglass composite, Macor ceramic, and graphite rod. The...

Introduction: In orthodontic treatment, adequate anchorage is necessary to move the intended teeth. In some cases, just anterior teeth are malaligned, while posterior occlusion is acceptable. Therefore, the posterior teeth could be integrated by fiber-reinforced composite (FRC) to provide a rigid anchorage. This method proved advantageous since brackets are bonded just to anter...

Expressions were presented which can be used to estimate the strengths of continuous fiber reinforced composite laminates containing pin-loaded holes. The expressions apply to laminates containing either a single pin loaded hole, a single row of pin loaded holes, or two parallel rows of pin loaded holes.

AIM To compare the efficacy of resin composite restorations, retained with either polyethylene or zirconia-rich glass fiber posts. METHODS Sixty-two single rooted maxillary and mandibular central incisor teeth in forty-four patients (15 males and 29 females; age range 15-32 years) were restored either with an ultrahigh molecular weight polyethylene (UHMWP) fiber post (Bondable Reinforcement R...

Objective The aim of this study was to examine the properties of fiber-reinforced composite and stainless steel twisted retainers for orthodontic retention. Methods Three different span lengths (5.0, 8.0, and 14.0 mm) of fiber-reinforced composite were investigated. The three fiber-reinforced composite retainer groups were subdivided according to the storage condition (dry and wet), resulting...

The purpose of this study was to evaluate the shear bond strength of two resin composites around different types of fiber posts. Twenty post specimens were prepared for three types of fiber posts. Posts were embedded in acrylic resin blocks with half of the post diameter exposed. The exposed portions of the posts were successively ground with silicon carbide paper until flattened flush with the...

Composite panels using virgin and recycled high-density polyethylene (VHDPE and RHDPE) and five types of natural fibers including four rice straw components (i.e., rice husk, rice straw leaf, rice straw stem, and whole rice straw) and wood fiber as control were made by melt compounding and compression molding. Fiber characteristics and the influences of fiber type and loading rate on HDPE cryst...