Carbon nanofibers were produced from polyacrylonitrile/N, N-Dimethyl Formamide (PAN/DMF) precursor solution using electrospinning and vacuum pyrolysis at temperatures from 773-1273 K for 0.5, 2, and 5 h, respectively. Their conductance was determined from I – V curves. The length and cross-section area of the nanofibers were evaluated using optical microscope and scanning probe microscopes, res...

wood vinegar is the aqueous phase of the liquid produced during the slow pyrolysis of wood.it has the potential to be used as a pesticide against various weeds, insects and molluscs. due to divergentfeedstocks, pyrolysis processes and storing conditions, the chemical composition of wood vinegar variesbetween producers and time. the aim of our current study was to use the copse snail arianta arb...

By using a thermogravimetric analyser under argon atmosphere, the pyrolysis process and the kinetic model of phoenix tree residues (the little stem, middle stem, and leaf) at a 30 °C min−1 heating rate and the phoenix tree mix at three different heating rates (10 °C min−1, 30 °C min−1, and 50 °C min−1) were examined. The catalyst and the co-pyrolysis samples were at a 30 °C min−1 heating rate. ...

Two flame retarded plastics have been pyrolysed in the presence of two Zeolite catalysts to remove the organobromine compounds from the derived pyrolysis oil. The flame retarded plastics were, acrylonitrile – butadiene – styrene (ABS) that was flame retarded with tetrabromobisphenol A and high-impact-polystyrene (HIPS) that was flame retarded with decabromodiphenyl ether. The two catalysts inve...

The fast pyrolysis process is developed to produce liquid bio oil from biomass. In the discussed process the required thermal energy is extracted from a circulating fluidized bed boiler (CFB) as hot sand fed into the pyrolysis reactor. Residual char and uncondensed gases from the pyrolysis process are fed back and combusted in the boiler. Thus, the pyrolysis and the boiler processes are interco...

Pyrolysis is an applicable method that has been widely used to recover hydrocarbons from Used Lubricating Oil (ULO). However, large-scale application of this approach has been limited by its noticeably energy and time consuming nature. In the present research, it has been attempted to modify the energy and time requirements of ULO pyrolysis using the catalytic effects of metal oxide nanoparticl...

This work analyzes a process known as flash pyrolysis, which produces bio fuels using biomass for power generation. A life-cycle assessment of flash pyrolysis of wood waste was conducted to study whether a flash pyrolysis plant set up locally would be environmentally friendly. The results obtained show that the process of flash pyrolysis of wood waste is in fact environmentally friendly, and th...

Pyrolysis-gas chromatography-mass spectrometry was performed on milled wood lignins (MWLs) and wood samples. Among the major pyrolysis products identified from loblolly pine lignin were guaiacol, 4-methylguaiacol, 4-vinylguaiacol, vanillin, coniferal­ dehyde, and coniferyl alcohol. White oak lignin pyrolysis products also included guaiacol, 4-methylguaiacol, and vanillin and addi­ tionally 2,6-...