A study has been carried out to investigate the influence of soot contaminated automotive lubricants in the wear process of a simulated engine valve train contact. Previous research on this topic has been mainly performed from a chemical point of view in fundamental studies, with insufficient relevance to real engine conditions i.e. load and geometry. This study investigates the conditions unde...

BACKGROUND Material wear testing is an important technique in the development and evaluation of materials for use in implant for total knee arthroplasty. Since a knee joint induces a complex rolling-gliding movement, standardised material wear testing devices such as Pin-on-Disc or Ring-on-Disc testers are suitable to only a limited extent because they generate pure gliding motion only. METHO...

Carbon-fiber-reinforced silicon carbide (C/C-SiC) composite is widely used as a friction material owing to its good performance, even though it is more expensive than metallic materials. The light C/C-SiC composite is an ideal candidate for weight reduction of frictional parts. In this study, the friction and wear behavior of C/C-SiC composite was assessed using a ball-on-disk friction tester u...

BACKGROUND Most contemporary total disc replacements (TDRs) use conventional orthopaedic bearing couples such as ultrahigh-molecular-weight polyethylene (polyethylene) and cobalt-chromium (CoCr). Cervical total disc replacements incorporating polyetheretherketone (PEEK) bearings (specifically PEEK-on-PEEK bearings) have been previously investigated, but little is known about PEEK-on-ceramic bea...

Ultralow wear nature of gallium nitride (GaN) has been revealed recently. The wear rate for GaN has a significant dependence on humidity, ranging from 9 10 9 mm3/Nm to 9.5 10 7 mm3/Nm; the mechanisms responsible for this variation in wear remain unclear. Here, we performed reciprocal sliding test on GaN under different environments and characterized the chemical compositions of corresponding wo...

BACKGROUND Cervical disc arthroplasty is regarded as a promising treatment for myelopathy and radiculopathy as an alternative to cervical spine fusion. On the basis of 2-year clinical data for the PRESTIGE(®) Cervical Disc (Medtronic, Memphis, Tennessee), the Food and Drug Administration recommended conditional approval in September 2006 and final approval in July 2007; however, relatively litt...

In the present study, the effect of banana peel and bagasse particle additives on the friction and wear behavior of multi-ingredient friction material nanocomposites have been investigated. In order to develop optimized properties of friction nanocomposite, the type and content of natural additives were changed beside the constant amount of other constituents such as alumina nanoparticle and ot...

In this work, study of wear modes antifriction layers B83 babbitt during tribological tests was carried out. The assumed conditions for changing were determined testing with a continuous increase in load by analyzing data changes the coefficient friction and temperature near contact zone. obtained made it possible to conduct experiments deeper processes occurring results studies electron micros...

The abrasive wear of nanocrystalline Ni–W alloys with grain sizes of 5–105 nm has been studied using Taber abrasion testing. The wear resistance of the finest grain size specimen is found to be higher than would be predicted based on hardness alone. This deviation from Archard scaling is traced to mechanically-driven structural evolution, consisting of grain growth and grain boundary relaxation...