This paper shows the manufacture route of the bronze 4% weight diamond composite rope for direct application as diamond wires, and linear saws in the slabbing and cutting of dimension stones. This route consists of powder mix compaction, sintering and rotary forging techniques. Tensile tests were performed, reaching an ultimate tensile strength of 230MPa for the diameter of ∅=1.84mm. Scanning e...

This study investigates the effects of cutting parameters on surface roughness (Raμm ), cutting temperature (T0C) at the chip tool interface and the material removal rate (MRR mm3/min) during hard machining of AISI 1015 (43 HRC) steel using carbide insert under dry and spray impingement cooling environment. A combined technique using orthogonal array and analysis of variance (ANOVA) was employe...

In this paper we present the first comprehensive study and analysis on different sketchbased mesh cutting approaches. To compare a representative number of state-of-the-art sketch-based mesh cutting methods, we conduct a large scale user study which was carried out via extensive user experiments. To address the objective assessment of the performances of different algorithms, a complete framewo...

Decision-tree-based packet classification algorithms such as HiCuts, HyperCuts, and EffiCuts show excellent search performance by exploiting the geometrical representation of rules in a classifier and searching for a geometric subspace to which each input packet belongs. However, decision tree algorithms involve complicated heuristics for determining the field and number of cuts. Moreover, fixe...

The current experimental study is to investigate the effects of process parameters (cutting speed, feed rate and depth of cut) on performance characteristics (surface roughness, machining force and flank wear) in hard turning of AISI 4340 steel with multilayer CVD (TiN/TiCN/Al2O3) coated carbide insert. Combined effects of cutting parameter (v, f, d) on performance outputs (Ra, Fm and VB) are e...

Laser cutting is one of the most widely used thermal energy based non-contact type advance machining process. In recent years, considerable experimental investigations have been carried out aiming at improving laser cutting process performance. This review paper aims at presenting the state of the art in the field of CO2 laser cutting of various engineering materials with special emphasis on ex...

Recently, research works on the bio-engineering actively carried out, and the useful tool for the micromanipulation is also developed. Purpose of this research is to develop the minute size knife for the cutting of the minute object such as the cell. In this paper, we report on the microknife that cuts o the object by using ultrasonic vibration of the sharp needle. We employed the multilayer pi...

The present study investigates the failure mechanisms of industrial fiber materials 13 a custom designed fiber cutting performance test bench. The fracture morpholog 14 fibers are examined by scanning electron microscopy. The analysis reveals that fiber cutting can be 15 distinguished according to four distinct stages of fiber failure represented by shearing, cutting, 16 brittle fracture, and t...

In machining industry, cutting fluids have an important role due to their lubrication, cooling and chip removal functions. Using of cutting fluids can improve machining process efficiency, tool life, surface quality and it can reduce cutting forces and vibrations. However, health and environmental problems are encountered with the use of cutting fluids. Therefore, there has been a high demand f...