The tensile creep and creep-recovery behaviour of a unidirectional SiC fibre-Si3N4 matrix composite was analysed using finite element techniques. The analysis, based on the elastic and creep properties of each constituent, considered the influence of fibre-matrix bonding and processing-related residual stresses on creep and creep-recovery behaviour. Both twoand threedimensional finite element m...

Creep performance of zinc borate-treated strandboard from southern pine (Pinus taeda L.) and red oak (Quercus falcata) was investigated at 25°C temperature and 65% relative humidity. It was shown that the borate treatment had some signifi cant effect on creep defl ection of the test panels, and the effect varied with wood species. There was no signifi cant effect of creep loading on residual be...

In-situ neutron diffraction measurements were performed on monocrystalline samples of the Ni-based superalloy CMSX-4 during N-type g0 raft formation under the tensile creep conditions of 1150 C/ 100 MPa, and subsequently on a rafted sample under the low temperature/high stress creep conditions of 715 C/825 MPa. During 1150 C/100 MPa creep, the g0 volume fraction decreased from ~70% to ~50%, the...

The tail tendons from wallabies (Macropus rufogriseus) suffer creep rupture at stresses of 10 MPa or above, whereas their yield stress in a dynamic test is about 144 MPa. At stresses between 20 and 80 MPa, the time-to-rupture decreases exponentially with stress, but at 10 MPa, the lifetime is well above this exponential. For comparison, the stress on a wallaby tail tendon, when its muscle contr...

In Exp. 1, 54 sows (PIC Line 1050) and their litters were used to determine the effects of creep feeding duration on the proportion of pigs consuming creep feed and preweaning performance. Two groups of sows were blocked according to parity and date of farrowing and allotted to 3 experimental treatments in a randomized complete block design. Creep feeding was initiated at d 7, 14, and 18 from b...

The exact prediction of creep is of great significance for the simulation of the stress field of concrete creep. To overcome the limitation of the current prediction model of creep, pertinent models abroad are referred and adopted so that other factors can be controlled under standard state but only the creep varies to evaluate the feasibility of the prediction model with current characteristic...

ÐThe longitudinal primary creep of long-®ber composites is modeled by considering the transient stress states arising from load transfer from the weaker matrix phase to the stronger ®ber phase as the composite transitions from the elastic state present immediately after loading to steady-state stage where both phases creep. The e€ect of primary creep of each of the phases on the primary creep o...

In this article, the time-dependent stress redistribution analysis of magneto-electro-elastic (MEE) thick-walled sphere subjected to mechanical, electrical, magnetic and uniform temperature gradient as well as moisture concentration gradient is presented. Combining constitutive equations of MEE with stress-strain relations as well as strain-displacement relations results in obtaining a differen...

Creep damage is one of the serious problems for the high temperature industries and computational approach (such as continuum damage mechanics) has been developed and used, complementary to the experimental approach, to assist safe operation. However, there are no ready creep damage constitutive equations to be used for predicting the lifetime for this type of alloy, particularly for low stress...

We performed an experimental study to evaluate the mechanical properties of polyvinylidene fluoride sutures and to compare their use with that of standard polypropylene sutures for the circumferential, epitendinous suture of a flexor tendon repair. Polyvinylidene fluoride sutures had a smaller suture diameter, a greater knot pull strength and less delayed extension when under creep testing, tha...