The objective of these experiments was to test the hypothesis that the "creep currents" induced by Na loading of single frog atrial cells (Hume, J. R., and A. Uehara. 1986. Journal of General Physiology. 87:833) may be generated by an electrogenic Na/Ca exchanger. Creep currents induced by Na loading were examined over a wide range of membrane potentials. During depolarizing voltage-clamp pulse...

This study has investigated the creep properties of asphaltic concrete modified with different dosages of waste polyethylene terephthalate (PET) in two different ranges of size. Uniaxial dynamic creep test at 40°C was conducted on the cylindrical specimens of the mixtures. The load was applied in two different frequencies of 0.5 and 5Hz. Creep test results showed that the accumulated strain und...

Title of Document: CONSTITUTIVE PROPERTY TESTING AND RELIABILITY ASSESSMENT OF LEADFREE SOLDER JOINT Yuri Lee, Master, 2010 Directed By: Professor Bongtae Han, Department of Mechanical Engineering A modified single lap shear test configuration, based on the Iosipescu geometry, is proposed to characterize mechanical properties of solder alloys. In the method, an auxiliary device (extension unit)...

The intention of the paper is to illustrate the ability of the probabilistic time-dependent reliability assessment procedure applied to non-linear suspended cable structure with rheological properties, when a rope made from the high strength synthetic fibres is used in order to demonstrate the new qualitatively different concept. Attention is turned to the individual main steps in the assessmen...

This study investigates the time-dependent long-term creep strain in a composite cylinder made of glass/vinylester with a unidirectional ply. The cylinder is subjected to an internal pressure and the boundary condition is free–free and acts as thermal insulation. The classical lamination theory (CLT) is used to derive the governing equations as a second-order equation to determine the radial, c...

In the current study the nonlinear viscoelastic response of a polymer matrix composite under multiple creep/creep-recovery loading is presented. The influence of creep/creep-recovery multiple step loading in the overall strain response both viscoelastic and viscoplastic is examined and an attempt for modeling this behaviour is attempted. An increase in the parameters of nonlinearity is observed...

Components in the industry are often exposed to elevated temperatures and high pressures. These conditions cause changes in the microstructure and thermo-mechanical properties of steel components. With the aim to determine the properties of steels after a certain period of operation, thermo-mechanical investigations and microstructure characterization can be made and the results of this investi...