This paper investigates the fatigue behaviour of out-of-plane gusset welded joints strengthened with carbon fibre reinforced polymer (CFRP) laminates. Two notches were introduced at the weld toes adjacent to longitudinal plate ends to simulate the initial damage. Variables including the stress range, singleor double-sided strengthening and modulus of CFRP materials were considered. It was found...

The digital image correlation method is extended to the study of transient deformations such as the one associated with a rapid growth of cracks in materials. A newly introduced rotating mirror type, multichannel digital high-speed camera is used in the investigation. Details of calibrating the imaging system are first described, and the methodology to estimate and correct inherent misalignment...

the main objective of this study is to drive a simple solution for prediction of steel fiber reinforced concrete (sfrc) behavior under four point bending test (fpbt). in this model all the force components at the beam section (before and after cracking) are formulated by applying these assumptions: a bilinear elastic-perfectly plastic stress-strain response for concrete behavior in compression,...

Using cold working fastener holes is a simple life enhancement procedure that strengthens metallic components by retarding crack growth around a hole. In the present paper, the residual stress field that is induced by the hole expansion process is obtained based on different material models namely elastic perfect plastic, isotropic hardening and kinematic hardening using three-dimensional finit...

The experimental determination of fracture mechanical properties of interface cracks is a substantial task for the design for reliability of electronic packages. As interface cracks are dominated by a mode mix between tension and shear mode (crack driving modes I and II) a mixed mode bending method was developed to adjust the ratio of the two modes (mode mixity). For a correct extraction of an ...

Various theories in the past have addressed the correlation of material properties and the respective acoustic emission release during fracture. Whilst these theories yield good predictions for fundamental relationships, they neglect the dynamic displacements during crack formation. This paper presents first results for a new acoustic emission crack source model based on a finite element modell...

ANALYSIS of the deformation field consistent with a Prandtl stress distribution travelling with an advancing plane-strain crack reveals the functional form of the near tip crack profile in an elastic-plastic solid. The crack opening 6 is shown to have the form 6 N r In (const./r) at a distance r from the tip. This observation coupled with data generated from finite element investigations of gro...

In this paper, the interface crack of two non-homogenous functionally graded materials is studied. Subsequently, with employing the displacement method for fracture of mixed-mode stress intensity factors, the continuous variation of material properties are calculated. In this investigation, the displacements are derived with employing of the functional graded material programming and analysis o...

The objective of this paper is to provide a fracture mechanics characterization mortar nanocomposites reinforced with multiwall carbon nanotubes (MWCNTs). critical stress intensity factor, KIc, the strain energy release rate, GIc, effective crack length, ac, and tip opening displacement, CTODc are determined using three-point bend specimens. It was established that reinforcement MWCNTs provides...

The paper reviews recent work on fundamentals of elastic-plastic finite-element analysis and its applications to the mechanics of crack opening and growth in ductile solids. The presentation begins with a precise formu~tion of incremental equilibrium equations and their finite-element forms in a marines valid for deformations of arbitrary magnitude. Special features of computational procedures ...