The crack-propagation form may appear as an arbitrary mixed-mode fracture in engineering structure due to irregular internal crack. It is of great significance research the materials with cracks. coupling effect multiple variables (crack height ratio, horizontal deflection angle and vertical angle) on parameters such stress intensity factors T-stress are key points this paper. A three-point ben...

Propagating cracks may deflect due to dynamic instability, running into pre-existing weak regions of heterogeneous media, or encountering variation in driving forces. The mechanical analysis a kinked crack is engineering significance for safety control and crack-network formation. Existing theories relied on the perturbation method, as befit small kinks. stress intensity factors (SIFs) are vali...

in this paper, a crack localization method for euler-bernoulli beams via an efficient static data based indicator is proposed. the crack in beams is simulated here using a triangular variation in the stiffness. static responses of a beam are obtained by the finite element modeling. in order to reduce the computational cost of damage detection method, the beam deflection is fitted through a poly...

the effect of steel plate thickness on the repair effectiveness of rc beam is presented in this paper. a total of four beams were tested, one beam repaired by cfrp with a thickness of 1.2 mm and used as a control beam, and three beams repaired by a steel plate. steel plates with a thickness of 2 mm, 3 mm, and 4 mm were used in repairing the beams. the maximum load-carrying capacity, deflection ...

ABSTRACT: Several reinforced concrete deep beams with different L/D ratios (1.5, 1.6, 1.71) were cast and tested in order to investigate the strain distribution pattern at mid-section of the beam. This paper describes analysis of deep beams subjected to two point loading with three different L/D ratios (1.5, 1.6, 1.71) using Non-linear Finite element method (ANSYS 9.0 software). In ANSYS 9.0 so...

based on two-dimensional plane stress and bifurcation functional from hill's general theory in polar coordinate the critical condition for elastic wrinkling of the flange of a circular blank ( the wave number in the flange and wrinkled area) during the deep-drawing process are obtained analyticaly to improve the previous given results. in this analytical study, the elastic limitation of the mat...

In this paper the problem of redirection a crack driven by viscous fluid under mixed mode loading is considered. The includes classical Modes I - III and hydraulically induced tangential traction on fracture walls. effect plastic deformation near tip zone accounted for. Different criteria to determine deflection angle are examined compared.

ID No: FC-169 ABSTRACT The continuous fiber reinforced self-healing ceramic composites (shFRC) were proposed as one of the candidate materials for turbine blade [1]. The shFRC consists of three components, which are oxide fiber bundle, oxide matrix and self-healing agent interlayer. As the self-healing is generated at only the interlayer, it is necessary that crack propagation is led into the i...

Different approaches were adapted to strength the structural elements increase load capacity and reduce deformation such as deflection. The easiest light external strengthening of reinforced concrete members are Fiber Reinforced Polymer (FRP) family Armed, Carbon, Glass Basalt, respectively. This paper presents theoretical approach check out experimental tests beams strengthened by glass fiber ...