Abstract Steel plate girders with I‐section are frequently used in industrial buildings and bridge design as prismatic members that means parallel flanges rectangular webs. The structural efficiency can significantly be achieved if such designed tapered webs non‐rectangular Depending on the flange inclination moment diagram, stress of is affected also known Résal effect. Furthermore, improved f...

A combined technique of an imaging plate (IP) and thin absorbers was applied to tritium in nickel and vanadium specimens using copper, aluminum, and gold foil as the absorber. Copper and aluminum foil are used as a K-edge filter with X-ray absorption at 9.0 keV and 1.56 keV, respectively. Gold has L-edges X-ray absorption at around 13 keV. With this technique, photostimulated luminescence (PSL)...

Plate heat exchangers are widely used in industries due to their special characteristics, such as high thermal efficiency, small size, light weight, easy installation, maintenance, and cleaning. The purpose of this study is to consider the effect of depth, angle, and pitch of hemispheric Chevrons on the convective heat transfer coefficient and pressure drop. In the simulation of the heat ex...

Plate heat exchangers are widely used in industries due to their special characteristics, such as high thermal efficiency, small size, light weight, easy installation, maintenance, and cleaning. The purpose of this study is to consider the effect of depth, angle, and pitch of hemispheric Chevrons on the convective heat transfer coefficient and pressure drop. In the simulation of the heat ex...

An analytical analysis has been presented to evaluate the performance of a solar-assisted va-pour absorption cooling system with flat-plate absorber plate. The lithium–bromide water cycle is used obsstain effect. parameters, namely plate efficiency, collector efficiency factor, heat removal etc. have deter-mined variation fluid inlet temperature. coefficient perfor-mance (COP), COP, refrigerati...

To maximize the controllable energy absorption of corrugation troughs as observed in the single sided corrugated (SSC) tube, we proposed and tested a new structure design, i.e., double-sided corrugated (DSC) tube made of Al 6060-T6 aluminum alloy or CF1263 carbon/epoxy composite. Finite element models were developed to test the mechanical advantage of the DSC tube in comparison with both SSC an...

Abstract During the last three decades, interest in application of steel shear walls has increased worldwide. Steel are used as stiffened and unstiffened walls. One main shortcomings plate wall (SPSW) is infill buckling mainly under lateral wind seismic loads. useful solutions to prevent use with corrugated plates. In this research, behavior a consisting two plates was investigated material cas...

By considering the elastic membrane's dissipation, the membrane-type acoustic metamaterial (MAM) has been demonstrated to be a super absorber for low-frequency sound. In the paper, a theoretical vibroacoustic plate model is developed to reveal the sound energy absorption mechanism within the MAM under a plane normal incidence. Based on the plate model in conjunction with the point matching meth...