this paper investigates the importance of considering biomass growth and decay for predicting a field scale microbial degradation of btex plume in an unconfined aquifer system in the pump station area of tehran oil refinery (tor), iran. a two-dimensional finite volume model has been presented to predict multi-species reactive transport incorporating physical, chemical and biological processes i...

Conventionally, methane is reformed into syngas, and subsequently converted into C1-oxygenates (methanol and formaldehyde). A novel option is the catalyst-free single-step conversion of methane to C1-oxygenates. This study presents a comprehensive model of methane partial oxidation to formaldehyde as an intermediate chemical species in methane oxidation process using microreactor. The dependenc...

Abstract Storing excess renewable energy in hydrocarbons produced from CO 2 potentially solves the intermittency issue of sources a green manner. The required reduction to can be efficiently accomplished with non-equilibrium plasma conversion. On an industrial scale, effects impurities on must taken into account. During this study, oxygen are considered, as impurity O is both product reaction a...

In the present research work, the kinetics of sunflower oil transesterification reaction in the presence of Ba-Sr/ZSM-5 nanocatalyst which prepared using incipient wetness impregnation method was investigated. The 10wt.%Ba-Sr/ZSM-5 (Sr/Ba=3/2) nanocatalyst was calcined at 600 °C for 6 h with a heating rate of 3 ºC/min. The experimental conditions were the methanol/oil 9/1molar ratio, reaction t...

The conversion of violaxanthin to zeaxanthin is essentially required for the pH-regulated dissipation of excess light energy in the antenna of photosystem II. Violaxanthin is bound to each of the antenna proteins of both photosystems. Former studies with recombinant Lhcb1 and different Lhca proteins implied that each antenna protein contributes specifically to violaxanthin conversion related to...

The modulus build-up and relative density evolution during the reactive foaming of four standard polyurethane formulations was monitored in-situ by Dynamic Mechanical Analysis (DMA) with a customised set-up in parallel plate geometry. increased from 0.01 MPa first minutes to over 1.2 within 20 min. also enabled recording vitrification followed curing times. These typically occur 3 min each othe...

  Abstract   The effect of mechanical activation using an attrition mill on the particle size of an ilmenite concentrate and its effect on the ability of the concentrate for Iron separation during hydrochloric acid leaching and the kinetics of the dissolution process have been investigated. It was observed that mechanical activation in an attritor significantly enhances the dissolution of iron ...

Understanding the mechanism of Na(+)/K(+)-dependent spectral conversion of human telomeric G-quadruplex (G4) sequences has been limited not only because of the structural polymorphism but also the lack of sufficient structural information at different stages along the conversion process for one given oligonucleotide. In this work, we have determined the topology of the Na(+) form of Tel23 G4, w...

The synthesis of citronellyl butyrate by direct esterification reaction catalyzed by immobilized lipase from Candida rugosa was studied in a continuous packed bed reactor using n-hexane as organic solvent. Parameters such as residence time, temperature, and pH were examined. The optimum conversion was obtained at a flow rate of 1 ml/min (residence time 8 min), temperature of 50 °C, and pH 7.5. ...

This study investigates the efficacy of a prepared Ni/θ-Al 2 O 3 catalyst during pyrolytic conversion Parachlorella kessleri HY-6 and compares results with non-catalytic conversion. The was characterized by techniques such as Brunauer–Emmett–Teller (BET) for surface area, acidity, X-ray powder diffraction (XRD). Isoconversional combined kinetic methods were used to kinetics process. at 10, 20, ...