Fiber reinforced concrete (FRC) has been widely used due to its advantages over plain concrete such as high energy absorption, post cracking behaviour, flexural and impact strength and arresting shrinkage cracks. But there is a weak zone between fibers and paste in fiber reinforced concretes and this weak zone is full of porosity, especially in hybrid fiber reinforced concretes. So it is necess...

This paper investigates the effect of testing variables including curing conditions (65% vs>95% RH), time of demoulding and specimen geometry (cylinder vs cube) on the compressive strength of hemp concrete. It studies hydration in the concrete’s microstructure and measures compressive strength development at intervals between 1 day and 1 month. Moulding time and curing conditions influence dryi...

To study effects of several factors on the properties of fly ash based geopolymer concrete on the compressive strength and also the cost comparison with the normal concrete. The test variables were molarities of sodium hydroxide(NaOH) 8M,14M and 16M, ratio of NaOH to sodium silicate (Na2SiO3) 1, 1.5, 2 and 2.5, alkaline liquid to fly ash ratio 0.35 and 0.40 and replacement of water in Na2SiO3 s...

A plasticity-fracture constitutive model is presented for prediction of the behavior of confined plain concrete. A three-parameter yield surface is used to define the elastic limit. Volumetric plastic strain is defined as hardening parameter, which together with a nonlinear plastic potential forms a non-associated flow rule. The use of non-associated flow rule improves the prediction of the dil...

ISSN 2277-5056 | © 2012 Bonfring Abstract--The use of recycled concrete aggregate is an important issue for preserving the natural resources, protecting the environment, saving of energy and for sustainable development. In this study, a unique simple mixture proportioning method was successfully adopted for developing SCC based on the absolute volume concept, starting with a volume of paste wit...

Results: The experiment results indicate that the type of recycled aggregate and its replacement ratio have significant effects on the freezethaw performance. The cubic compressive strength of recycled aggregate concrete is overall slightly lower than that of normal concrete. After 100 freeze-thaw cycles, the compressive strength decreases and the reduction extent increases with increasing repl...

in this paper, the effect on the strength properties of high strength concrete (hsc) manufactured with silica fume (sf) and ground pumice (gp) is investigated. portland cement was replaced with sf, gp and combination of sf and gp up to 25%. 22 different concrete mixtures with these replacement ratios were produced by using 0.25 water-binder ratio. the ultrasound pulse velocity, compressive, spl...

The objective of this study is to examine the compressive strength and durability of very high-volume SCM concrete. The prepared 36 concrete specimens were classified into two groups according to their designed 28-day compressive strength. For the high-volume SCM, the FA level was fixed at a weight ratio of 0.4 and the GGBS level varied between the weight ratio of 0.3 and 0.5, which resulted in...

In the rapidly developing modern society, many raw materials, such as crushed limestone and river sand, which are limited, are consumed by the concrete industry. Naturally, the usage of waste materials in concrete have become an interesting research area in recent years, which is used to reduce the negative influence of concrete on the environment. Hence, this paper presents the development of ...

Surface wave velocity measurement of concrete using ultrasonic sensors requires testing on only one side of a member. Thus, it is applicable to concrete cast inside a form and is often used to detect flaws and evaluate the compressive strength of hardened concrete. Predicting the in situ concrete strength at a very early stage inside the form helps with determining the appropriate form removal ...