We propose a porosimetry-based method to characterize pores formed by carbon nanotubes (CNTs) in the CNT agglomerates for designing neat CNT-based materials and composites. CNT agglomerates contain pores between individual CNTs and/or CNT bundles (micropore < 2 nm, mesopores 2-50 nm, and macropores > 50 nm). We investigated these pores structured by CNTs with different diameters and number of w...

The surfaces of acid- and amine-functionalized carbon nanotubes (C-CNT and N-CNT) were decorated with MnO2 nanoflakes as supercapacitors by a spontaneous redox reaction. C-CNT was found to have a lower edge plane structure and fewer defect sites than N-CNT. MnO2/C-CNT with a highly developed surface area exhibited favorable electrochemical performance. To determine the atomic/electronic structu...

The identification of effective components on the atomic scale in carbon nanomaterials which improve the performance in various applications remains outstanding challenges. Here the catalyst residues in individual carbon nanotube (CNT) and carbon nanofiber (CNF) were clearly imaged with a concurrent characterization of their electronic structure by nanoscale scanning transmission X-ray microsco...

Vertically well-aligned multi-walled carbon nanotubes (MWNTs) with uniform diameters ( 15 nm) were grown on catalytic probes at high yield rates in an inverse diffusion flame (IDF) of a co-flow jet configuration using methane as fuel. Varied parameters investigated included: alloy composition (e.g. Fe, Ni/Cu, Ni/Cr/Fe), sampling positions within the flame structure, and voltage bias applied to ...

Growth of vertically aligned carbon nanotube (CNT) carpets on metallic substrates at low temperatures was achieved by controlled thermal treatment of ethylene and hydrogen at a temperature higher than the substrate temperature. High-resolution transmission electron microscopy showed that nanotubes were crystalline for a preheating temperature of 770 degrees C and a substrate temperature of 500 ...

A novel horizontally aligned single-walled carbon nanotube (CNT) Field Effect Transistor (FET)-based biosensing platform for real-time and sensitive protein detections is proposed. Aligned nanotubes were synthesized on quartz substrate using catalyst contact stamping, surface-guided morphological growth and chemical vapor deposition gas-guided growth methods. Real-time detection of prostate-spe...

A hybrid composite architecture of carbon nanotubes (CNTs), advanced fibers and a matrix is described, from CNT synthesis and characterization through to standard mechanical and electrical laminate tests. Direct growth of aligned CNTs on the surface of advanced fibers in a woven fabric enables enhancement in multifunctional laminate performance, as demonstrated by a 69% increase in interlaminar...

We have established a fabrication process for conductive carbon nanotube (CNT) tips for multiprobe scanning tunneling microscope (STM) with high yield. This was achieved, first, by attaching a CNT at the apex of a supporting W tip by a dielectrophoresis method, second, by reinforcing the adhesion between the CNT and the W tip by electron beam deposition of hydrocarbon and subsequent heating, an...

To improve the understanding on CNT growth modes, the various processes, including thermal CVD, MP-CVD and ECR-CVD, have been used to deposit CNTs on nanoporous SBA-15 and Si wafer substrates with C(2)H(2) and H(2) as reaction gases. The experiments to vary process parameter of DeltaT, defined as the vector quantities of temperature at catalyst top minus it at catalyst bottom, were carried out ...

Carbon nanotubes (CNTs), nowadays, are one of the important nanomaterials that can be produce with different methods such as chemical vapor deposition (CVD). Growing of CNTs via CVD method can be influenced by several operating parameters that can affect their quality and quantity. In this article, the effects of inlet gas mixture temperature on CNT’s local growth rate, total production, and le...