using of nanofluids and ducts with corrugated walls are both supposed to enhance heat transfer, by increasing the heat transfer fluid conductivity and the heat transfer area respectively. use of a diverging duct with a jet at inlet section may further increase heat transfer by creating recirculation zones inside the duct. in this work two-dimensional incompressible laminar flow of a nanofluid e...

In this study, the effectiveness of two conventional UV reactors in series for the online sterilization of cheese whey was compared to that of a single conventional reactor. The single reactor and the two reactor series were tested at eleven flow rates (5, 10, 15, 20, 25, 30, 35, 40, 50, 60 and 70 mL min ) and five flow rates, (35, 40, 50, 60, 70 mL min ), respectively. 100% destruction efficie...

Due to its structure, hexamethylenetetramine (HMT) is a slowly biodegradable substance, hydrolysing in acid environment to ammonium and formaldehyde. Formaldehyde is toxic under normal conditions for biological treatment processes. Following an adaptation, a formaldehyde concentration of 1000 mg·l may become biodegradable both in aerobic and anaerobic conditions. Acidic conditions for hydrolysi...

Pellet heat and mass transfer coefficients inside packed beds do not have definite deterministic values, but are stochastic quantities with a certain distribution. Here, a method is presented to incorporate the stochastic distribution of pellet properties in reactor design and operation models. The theory presented is illustrated with a number of examples. It is shown that pellet-scale statisti...

Approach • Complete reverse kinetics and Computational Fluid Dynamics (CFD) modeling to optimize reactor geometry for forward reactions • Measure forward kinetics in quartz & Inconel reactors to determine reactor wall catalysis • Measure forward kinetics in reactor packed with membrane material to determine catalytic activity • Measure membrane H2 permeability in presence of clean syngas compon...

Situated at the bottom of vacuum vessel, divertor extracts heat and ash produced by fusion reaction, minimizes plasma contamination, protects surrounding walls from thermal neutronic loads. The vertical targets are designed to be able for up 20 MW/m2 high flux. It is a great ordeal both material performance cooling ability. Critical flux margin very crucial during design divertor. ANSYS FLUENT ...