OBJECTIVES The aim of this study was to assess the influence of various ceramic thicknesses and luting agents on color variation in five ceramic systems. METHODS Fifteen disc-shaped ceramic specimens (11 mm diameter; shade A3) were fabricated with each of the six veneering ceramics tested, with 1, 1.5, or 2 mm thickness (n=5). Resin composite discs (Z-250, shade C4) were used as bases to simu...

A SUBSTANTIAL PERCENTAGE of 2 by 4 studs cut from southern pine veneer cores or small logs warp excessively when kiln-dried to 9 or 10 percent moisture content (MC). Warp can be significantly reduced by mechanical restraint during the drying process (Koch 1971). One practical way of applying restraint calls for a top load on each kiln stack to impress sharply toothed kiln sticks into each board...

An improved process for slip casting ceramic articles that does not employ parting agents and affords the casting of complete, detailed, precision articles that do not possess parting lines. A wax pattern for a shell mold is provided, and an aqueous mixture of a calcium sulfate-bonded investment material is applied as a coating to the wax pattern. The coated wax pattern is then dried, followed ...

A new solution in closed form is obtained for the thermomechanical deformations of an isotropic linear thermoelastic functionally graded elliptic plate rigidly clamped at the edges. The through-thickness variation of the volume fraction of the ceramic phase in a metal–ceramic plate is assumed to be given by a power-law type function. The effective material properties at a point are computed by ...

PURPOSE The aim of this study was to evaluate the effect of thickness of zirconia on curing efficiency of resin cements. MATERIALS AND METHODS Four discs with 4.0 mm in diameter were prepared from non-HIP translucent zirconia blocks using a CAD/CAM system and feldspathic ceramic was layered onto discs. Thus, 4 ceramic disc samples were fabricated: (G) 0.5 mm zirconia- as a control group, (G1)...

This study was carried out to determine the design and thickness of the cervical margin of a castable ceramic restoration from the point of view of its castability. Castability of castable ceramics was lower compared to Ag-Pd-Au and Co-Cr alloy with the use of the mesh pattern and rod pattern test (p < 0.05). It was more dependent on the pattern thickness than alloys (p < 0.05), and perfect rep...