Sandcastle worms Phragmatopoma californica build mound-like reefs by sticking together large numbers of sand grains with cement secreted from the building organ. The cement consists of protein plus substantial amounts of calcium and magnesium, which are not invested in any mineral form. This study examined the effect of calcium and magnesium depletion on the structural and mechanical properties...

Dislocation of a total hip replacement (THR) is common following total hip arthroplasty (THA). When nonoperative management fails to maintain reduction, revision surgery is considered. The use of constrained acetabular liners has been extensively described. Complete removal of the old cement mantle during revision THA can be challenging and is associated with significant complications. Cement-i...

This study investigates the bonding behaviour of Norway spruce wood strands to a surrounding cement matrix. Effects of wood swelling and shrinking during cement curing were studied by using strands of various thicknesses. The deformation of the spruce wood strands and the surrounding cement matrix, as well as the interface between the wood and the cement were examined using Electronic Laser Spe...

Study Design Biomechanical analysis of lateral mass screw pullout strength. Objective We compare the pullout strength of our bone cement-revised lateral mass screw with the standard lateral mass screw. Methods In cadaveric cervical spines, we simulated lateral mass screw "cutouts" unilaterally from C3 to C7. We salvaged fixation in the cutout side with polymethyl methacrylate (PMMA) or Cortoss ...

Carbon nanotubes (CNTs) have excellent mechanical properties and can be used to reinforce cement-based materials. On the other hand, the reaction product of carbonation with hydroxides in hydrated cement paste can reduce the porosity of cement-based materials. In this study, a novel method to improve the strength of cement paste was developed through a synergy of carbon nanotubes decorated with...

The relationship between metallic cast crowns and tensile strength according to cement types submitted to thermocycling was studied. Seventy-two metallic crowns were cast with Verabond II Ni-Cr alloy and cemented in standardized preparations with 10 masculine tapering. Three types of finishing line (45-degree chamfered, 20-degree bevel shoulder and right shoulder) were made with diamond burs on...

Understanding the cement injection behaviour during vertebroplasty and accurately predicting the cement placement within the vertebral body is extremely challenging. As there is no standardized methodology, we propose a novel method using reproducible and pathologically representative flow models to study the influence of cement properties on injection behaviour. The models, confined between an...

Marginal leakage was demonstrated in all the inlays at all time intervals with all cements by the use of the isotope Ca45. Gross marginal leakage was observed in all inlays luted with the cyanoacrylate cement at all time intervals. The setting time of this cement is very short, making it difficult to completely seat the inlay before the cement sets. The results of this study indicate that the c...

Glenoid loosening was associated with stress at the implant and cement. The purpose of this study was to determine the effect of pegs and its distribution on stress transfer to the implant and cement. Six commercially available implant designs were simulated via finite element analysis with different peg distributions. Maximum stress at the implant and cement and stress critical area (SCA) at t...

Exposure conditions significantly affect the resistance of cement to sulfate attack. This article investigates the effect of sulfate on electrical conductivity of ordinary Portland cement (OPC). Cement paste specimens were prepared according to water/cement (W/C) ratio equal 0.25 either free of sodium sulfate or its addition with concentrations of 5000ppm, 10000ppm and 15000ppm by weight. This ...