The paper presents the results of casting and testing of 264 GFRC specimens. The glass fibers were 25 mm long, with the aspect ratio (L/D) ranging between 1250 and 3570. The parameters studied were the ratio (by weight) of fibers to cement, i.e. F/C=0%, 1.5%, 3%, and 4.5%, and the ratio of coarse to fine aggregates (gravel to sand), i.e. G/S=1.1, 0.7 and 0.2. In total, 12 mix designs were selec...

Abstract The water-cement ratio is one of the key parameters grouting materials, which greatly affects working performance and mechanical properties materials. This paper studies physical properties, such as density, fluidity, consistency, bleeding rate, stone flexural compressive strength micro-cement materials with a 0.8:1, 1:1, 1.5:1 2.0:1 are investigated through variety indoor experiments....

Many concrete structures are required to have sufficient abrasion resistance, such as dams, canals, roads and floors. The abrasion resistance of concrete may be defined as its ability to resist being worn away by rubbing. Compressive strength and aggregate type are also important factors affecting the abrasive behaviour of concrete. However, very little information on the properties of haematit...

Different mineral admixtures of Indian metakaolin, Iranian silica fume and nanosilica were used to produce high performance mortars. Two different sands types with grain size of 0.015-4mm were mixed with type II Portland cement, polycarboxylate superplasticizer,mineral admixture with 650kg/m3 cement content and water/cement ratio of 0.35. Different amount of cement was replaced by metakaolin or...

Recyclable concrete pavement was made from fly ash and crushed limestone sand and gravel as aggregates so that the concrete pavement could be recycled to raw materials for cement production. With the aim to use as much fly ash as possible for the sustainable development of society, while achieving adequate strength development, pavement concrete having a cement-replacement ratio of 40% by mass ...