To measure electromagnetic fields accurately, the calibration of field probes is necessary. In this paper, an accurate lowcost calibration method is presented. However, calibration does not take into account all influencing factors, especially when measuring fields close to the source (e.g., antenna). While measuring, the electromagnetic field will be disturbed by the measurement probes themsel...

The commercially available systems for EC inspection usually use only the phase and amplitude information. After the detection (with amplitude and phase thresholds), the defects are sized using calibration curves and the phase information. Such a system is not foolproof, usually because ofincorrect or spurious defect detection. Therefore, in practice the classification made by the system is usu...

The ALICE Trigger System is made up of two independent parts: a Central Trigger Processor (CTP) and a Trigger Distribution Network. The CTP provides the trigger decision logic. It generates triggers for the readout detectors by evaluating inputs from triggering detectors. The Trigger Distribution Network delivers these triggers to the detectors; in addition it is capable of running in standalon...

The ARGO-YBJ experiment has been designed to detect air shower events over a large size scale and with an energy threshold of a few hundreds GeV. The building blocks of the ARGO-YBJ detector are single-gap Resistive Plate Counters (RPCs). The trigger logic selects the events on the basis of their hit multiplicity. Inclusive triggers as well as dedicated triggers for specific physics channels or...

background: 7-lif: mg,cu,p (gr-207a) is one kind of thermo-luminescent dosimeters (tld) which can be used in diagnostic radiology and radiotherapy applications. because of having suitable properties such as good sensitivity, small size and being tissue equivalent, thermo-luminescent dosimetry has been one of the most important techniques in medicine over many years. choosing a correct energy fo...

This report describes the characterization of a series of commercially available procyanidin standards ranging from dimers DP = 2 to decamers DP = 10 for the determination of procyanidins from cocoa and chocolate. Using a combination of HPLC with fluorescence detection and MALDI-TOF mass spectrometry, the purity of each standard was determined and these data were used to determine relative resp...

Damage detection and calibration in beams by wavelet analysis involve some key factors such as the damage model, the choice of the wavelet function, the effects of windowing and the effects of masking due to the presence of noise during measurement. A numerical study has been performed in this paper addressing these issues for single and multispan beams with an open crack. The first natural mod...

Modern X-ray units register the air kerma-area product, PKA, with a built-in KAP meter. Some KAP meters show an energy-dependent bias comparable with the maximum uncertainty articulated by the IEC (25 %), adversely affecting dose-optimisation processes. To correct for the bias, a reference KAP meter calibrated at a standards laboratory and two calibration methods described here can be used to a...

Multiple-locus variable-number of tandem repeats analysis (MLVA) is widely used for typing of pathogens. Methods such as MLVA based on determining DNA fragment size by the use of capillary electrophoresis have an inherent problem as a considerable offset between measured and real (sequenced) lengths is commonly observed. This discrepancy arises from variation within the laboratory set-up used f...