in this paper, direct numerical simulation of two-phase incompressible gas-liquid flow for simulation of bubble motion in a microtube is presented. microtube radius is 10 µm. the interface is tracked using volume of fluid (vof) method with continuous surface force (csf) model. the flow is solved using a finite volume scheme, based on piso algorithm. numerical simulation is performed on a axisym...

Using a fast X-ray tomography setup measurements have been done on a 25 cm diameter f luidized bed of Geldart B pow^der and a 24 cm bed of Geldart A powder. The average bubble sizes have been determined over a measurement period of 60 seconds. The resolution of this setup is about 4.5 m m per pixel at a rate of 250 reconstructions per second. I t is possible to detect bubbles as small as 2.5 cm...

Although CO2 injection is one of the most common methods in enhanced oil recovery, it could alter fluid properties of oil and cause some problems such as asphaltene precipitation. The maximum amount of asphaltene precipitation occurs near the fluid pressure and concentration saturation. According to the description of asphaltene deposition onset, the bubble point pressure has a very special imp...

Bubble column reactors are used in a wide variety of applications such as multiphase bioreactors, catalytic slurry reactors, and absorption processes. The superficial gas velocity-gas holdup relationship and transition point are two important parameters for characterizing the hydrodynamics of a bubble column reactor. In this study, systematic investigation of a nitrogen - water - glass bead...

• A predictive model was introduced to describe the dissolution of stably trapped bubbles in corner cavities pipe systems. The most accurate way air-water interface is with a no-slip boundary condition due presence surfactants. correlation between bulk Reynolds number, vertical aspect ratio, Schmidt number and Sherwood found on analysed range. Sh-correlation based numerical simulations, which a...

In this study, we devise a method to generate homogeneous particles from a bubble suspension, with the capability to control loading and the structure of bubbles. Ideally, a process such as this would occur at the interface between daughter bubble formation (instant) and gaseous diffusion (gradual). Interestingly, the budding mechanism in micro-organisms is one that demonstrates features of the...

We report the first experimental realization of a three-dimensional thermal cloak shielding an air bubble in a bulk metal without disturbing the external conductive thermal flux. The cloak is made of a thin layer of homogeneous and isotropic material with specially designed three-dimensional manufacturing. The cloak's thickness is 100  μm while the cloaked air bubble has a diameter of 1 cm, ach...

[1] The bubble cloud depth and its correlation with extreme winds are key elements of bubble‐mediated gas injection, which are critical to the determination of the global gas budgets. The characteristics of bubble cloud depth were examined frommeasurements collected during the passage of a category‐4 hurricane with winds up to 50 m s. The bubble cloud depth increases linearly with wind speed fo...

"Air-seeding" is a proposed mechanism for the initiation of water stress embolism in dead plant cells. During air-seeding, external air is drawn into the lumen of a dead plant cell through a pore or crack in the cell wall. The resulting bubble may expand to fill the lumen, thus embolizing the cell. The data presented confirm that Sphagnum hyalocysts can embolize by air-seeding when the pressure...