We have designed, fabricated, and characterized metamaterial enhanced bimaterial cantilever pixels for far-infrared detection. Local heating due to absorption from split ring resonators (SRRs) incorporated directly onto the cantilever pixels leads to mechanical deflection which is readily detected with visible light. Highly responsive pixels have been fabricated for detection at 95 GHz and 693 ...

Rapid means of characterizing and detecting virus particles are very important for a wide variety of applications. We have used vaccinia virus, a member of the Poxviridae virus family and the basis of the smallpox vaccine, as the test case and characterized these particles using atomic force microscopy and micron-scale cantilever beams, with the long-term goal of developing devices for the dire...

Piezo bimorph mirrors are versatile active optics used on many synchrotron beamlines. However, many bimorphs suffer from the `junction effect': a periodic deformation of the optical surface which causes major aberrations to the reflected X-ray beam. This effect is linked to the construction of such mirrors, where piezo ceramics are glued directly below the thin optical substrate. In order to ad...

Extracting energy from ambient vibration to power wireless sensor nodes has been an attractive area of research, particularly in the automotive monitoring field. This article reports the design, analysis and testing of a vibration energy harvesting device based on a miniature asymmetric air-spaced cantilever. The developed design offers high power density, and delivers electric power that is su...

1. Abstract A new integrated grasping tool for minimally invasive surgery has been designed consisting of two piezoelectric bimorph actuators. To improve the force and deflection performance of the bimorphs, a segmented design with varying piezoelectric layer thicknesses is proposed, and an optimization procedure developed for sizing the section thicknesses. Design of experiments and response s...

We have evaluated the ability of three commercially available deformable mirrors to compensate the aberrations of the eye using a model for aberrations developed by Thibos, Bradley and Hong. The mirrors evaluated were a 37 actuator membrane mirror and 19 actuator piezo mirror (OKO Technologies) and a 35 actuator bimorph mirror (AOptix Inc). For each mirror, Zernike polynomials and typical ocula...

This article presents a comparison of hysteresis courses in the motion two-input actuator (bimorph) and single-input (unimorph). The was based on results laboratory numerical experiments, subject which an built three layers: carrier layer from glass-reinforced epoxy laminate two piezoelectric layers Macro Fiber Composite. were glued together, electrodes Composite connected to system that includ...

the resonant frequency and sensitivity of an atomic force microscope (afm) cantilever with assembled cantilever probe (acp) have been analyzed and a closed-form expression for the sensitivity of vibration modes has been obtained. the proposed acp comprises an inclined cantilever and extension, and a tip located at the free end of the extension, which makes the afm capable of topography at sidew...

This study investigates the asset pricing implications of the V-shaped disposition effect, a newly-documented behavior pattern characterized by investors being more likely to sell a security when the magnitude of their gains or losses on it increases. I find that, on an aggregate level, stocks with both large unrealized gains and large unrealized losses outperform others in the following month....

This paper deals with the bending of layered piezoelectric beams (multimorphs) subjected to arbitrary electrical and mechanical loading. Weinberg [1] obtaind a closed-form solution to this problem using Euler–Bernoulli beam theory and integrated equilibrium equations. In his analysis, Weinberg assumes that the electric field is constant through the thickness of the piezoelectric layers. This ap...