In present study, two kinds of thermal power plant ashes; one the fly ash and the other waste ash are mixed with adhesive tragacanth and cement to produce new composite materials. 48 new samples are produced by varying the percentages of the fly ash, waste ash, cement and tragacanth. The new samples are subjected to some tests to find out their properties such as thermal conductivity, compressi...

Abstract—The main objective of this paper is study the influence of carbon nano-tubes fibers and nano silica fibers on the characteristic compressive strength and flexural strength on concrete and cement mortar. Twelve tested specimens were tested with square section its dimensions (4040 160) mm, divided into four groups. The first and second group studied the effect of carbon nano-tubes (CNT...

We investigate the performance of graphene oxide (GO) in improving mechanical properties of cement composites. A polycarboxylate superplasticizer was used to improve the dispersion of GO flakes in the cement. The mechanical strength of graphene-cement nanocomposites containing 0.1-2 wt% GO and 0.5 wt% superplasticizer was measured and compared with that of cement prepared without GO. We found t...

In this study it has been initiated to find out the credit strength and financial performance of cement industries in Bangladesh through investigating the financial report for the period from 2007 to 2011. Financial ratios are employed to measure the Liquidity (Working capital to Total Assets), Profitability (Retained Earnings to Total Assets), Efficiency (Earnings before Interest and Taxes to ...

BACKGROUND This study examined the effects of addition of 10% and 25% by weight calcium hydroxide on the physicochemical properties of Portland cement associated with 20% bismuth oxide in order to develop a new pulp capping material. MATERIAL AND METHODS The solubility, pH value, setting time, compressive strength, and push out bond strength of modified Portland were evaluated and compared to...

Tensile bond strength and failure location were evaluated in vitro for three types of direct bonding cements (unfilled, low filled, and highly filled) with three types of brackets (polycarbonate, stainless steel, and ceramic) using natural teeth and plastic as substrates. An unfilled acrylic cement gave the highest values of bond strength for both the plastic and ceramic brackets, whereas a hig...

The aim of this research was to study the effect of various water-to-cement ratio on the properties of pervious concrete. Tests were carried out to find the optimum water-to-cement ratio that gives a high compressive strength with acceptable permeability. The tests of fresh density, compressive strength at 7days, porosity and water permeability for four mixes of pervious concrete with various w...

Cement kiln dust produced in a local cement production plant in Saudi Arabia, along with fly ash resulting from combustion of heavy fuel oil in a local power generation plant were utilized as waste materials blended with ordinary Portland cement at various ratios. These blends were tested for their water requirements for normal consistency, initial setting times, and compression and tensile str...

synopsis-in this research, possible usage of eaf dust on cement is investigated. therefore, effects of addition of different percentages of eaf dust on the most important properties of cement such as hydration heat, water coefficient, viscosity, initial and final setting times, strength development and leachability of heavy metals were studied. results showed that eaf dust alters the characteri...