This review considers current Zr alloys and opportunities for advanced zirconium to meet the demands of a structural material in fusion reactors. based materials breeder blanket offer potential increase tritium breeding ratio above that Fe, Si V materials. Current commercial might be considered as water-cooled designs, due similar operating temperature fission power plants. For blankets designe...

Li 6.4 Ga 0.2 La 3 Zr 2 O 12 can be reduced by Li, which results in leaching out of the garnet structure to form Li–Ga alloy. The penetrated alloy short-circuit battery when Ga-substituted LLZO is used as a solid electrolyte.

Although the equilibrium phase diagram predicts that alloys in the central part of the V-Zr system should consist of V2Zr Laves phase with partial segregation of one element, it is known that under non-equilibrium conditions these materials can form amorphous structures. Here we examine the structures and stabilities of thin film V-Zr alloys deposited at room temperature by magnetron sputtering...

a nano/ultra-fine grain al-0.2wt% zr alloy was produced by accumulated roll bonding (arb) processafter 10 cycles. the fraction of high angle grain boundaries increased from 8% to 65.4% during 10passes during arb process. this alloy was subjected to tensile test at different temperatures (523,573and 623 k) and strain rates (0.1 and 0.01 s-1). the optimum condition of temperature and strain rate ...

A multiphase nanostructured ZrCu-base bulk alloy which showed a unique microstructure consisting of sub-micrometer scale Zr₂Cu solid solution, nano-sized twinned plate-like ZrCu martensite (ZrCu (M)), and retained ZrCu (B2) austenite was fabricated by copper mold casting. The observation of periodic morphology evolution on the fracture surface of the multiphase nanostructured ZrCu-base alloys h...

We present an approach to reduce the convective flow in an electrostatically levitated liquid droplet to such an extent that diffusion is the dominant mechanism for mass transport, thus enabling direct measurements of atomic diffusion in reactive liquids at elevated temperatures. Convection is minimized by containerless processing, and reducing temperature variations in the sample. The diffusio...

The isothermal oxidation of Fe-28Al-5Cr (at%) intermetallic alloy microalloyed with Zr and B (<0.08 at%) in air atmosphere, in the temperature range of 1000 to 1200 °C, was studied. The investigation was carried out on the thin-walled (<1 mm) elements prepared by Laser Engineered Net Shaping (LENS) from alloy powder of a given composition. Characterization of the specimens, after the oxidation,...

A strategy of suppressing the fast degradation behaviour of Mg-based biomaterials by the introduction of one of Mg degradation products Mg(OH)2 was proposed according to the following degradation mechanism, Mg + 2H2O ⇋ Mg(OH)2 + H2↑. Specifically, Mg(OH)2 submicron particles were mixed into poly (L-lactic acid) (PLLA) to synthesize a composite coating onto hydrofluoric acid-pretreated Mg-Nd-Zn-...

Mechanisms of the formation of nanoparticles of some B2 shape memory intermetallic compounds, glass-forming Zr-based alloy, and pure Ti obtained by spark erosion method in liquid nitrogen and argon are considered. One of peculiarity is a foam-like structure, which covers the surface of micron-sized particles that appear during spark erosion. Such morphology is related to the nanosized particles...

The effect of Ni-content on phase transformation behavior of NiTi-20 at. % Zr high temperature shape memory alloy (HTSMA) is investigated over a small composition range, i.e., 49.8, 50.0 and 50.2 at. % Ni, by differential scanning calorimetry (DSC), high-energy synchrotron radiation X-ray diffraction (SR-XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). All s...