The magnetite (Fe3O4) – agar nanocomposite was prepared by co-precipitation of Fe (III) and Fe (II) ions for the first time. The obtained samples were characterized by x-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy and transmission electron microscopy. FT-IR results confirm the formation of Fe3O4 nanoparticles...

The photocatalytic coatings were prepared via incorporating the modified titania nanoparticles into epoxy-based inorganic-organic hybrid coatings. Titania nanoparticles were first synthesized from tetra-n-butyl titanate using sol-gel methods by two different calcination treatments, i.e., in mild condition (80°C) and 500°C. The formed anatase nanoparticles were further modified as Titania-Silica...

The photocatalytic coatings were prepared via incorporating the modified titania nanoparticles into epoxy-based inorganic-organic hybrid coatings. Titania nanoparticles were first synthesized from tetra-n-butyl titanate using sol-gel methods by two different calcination treatments, i.e., in mild condition (80°C) and 500°C. The formed anatase nanoparticles were further modified as Titania-Silica...

BaFe2O4 nanostructures have been synthesized through a simple sonochemical reduction approach. X-ray diffraction characterization suggested that the product consists of cubic phase pure BaFe2O4. The as-prepared products were also characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). An X-ray energy dispersive spectroscopy (EDX) study further confirmed t...

In this research, novel functionally graded Ni-P coating was deposited with electroless process. The content of phosphorus was controlled to change gradual through the thickness of the coating. During the plating, bath temperature and pH were changed at specified intervals to obtain functionally graded structure. To compare the properties of functionally graded coating with Ni-P single-layer co...

carbon nanotubes were synthesized over a series of zn-containing fe/alumina catalysts by chemical vapor deposition method at two reaction temperatures of 850 and 950 °c using methane as a carbon source. catalysts were synthesized by keeping fe concentration constant and varying zn concentration to study the effects of zn. the catalysts were characterized using x – ray powder diffraction and n2 ...

Confocal laser scanning microscopy (CLSM), transmission electron microscopy (TEM), and soft X-ray scanning transmission X-ray microscopy (STXM) were used to map the distribution of macromolecular subcomponents (e.g., polysaccharides, proteins, lipids, and nucleic acids) of biofilm cells and matrix. The biofilms were developed from river water supplemented with methanol, and although they compri...

tungsten trioxide nanoparticles with monoclinic structure and average particle size about 80 nm were prepared by the spray pyrolysis method. wo3 nanorods with hexagonal structure and average dimension about 15 × 100 nm were synthesized in gram quantities by modified hydrothermal method at lower temperature and shorter reaction time in comparison to the previous research. photo degradation of co...

In the present study, the gamma alumina (γ-Al2O3) nano powders have been prepared with addition of 1%mol Co using an aqueous sol-gel method at lower temperature than the pure gamma alumina. The synthesis process accomplished by partial hydrolysis of the aqueous solution of metallic ions Al3+ and Co2+, with ammonia. The Al(NO3)3.9H2O and Co(NO3)2.6H2O salts were used as cations sources. The obta...