From decades Creep has been known and studied for textile materials. In comparison, a newly observed phenomenon of inverse creep seems not to have received much attention. A new instrument has been fabricated to measure creep and inverse creep in textile materials particularly yarns. Creep and Inverse creep measurements of few of the textile yarns like nylon multifilament yarn, Polyester multif...

The aim of this research is to design a controlling loop that eliminates the irregularities in yarn tension during the winding process. In order to achieve this, we employed a relative feedback industrial control system. The yarn tension sensor measures the tension. Its output is analyzed in the automatic controlling unit. This unit adjusts the tension level according to feedback signals, thus ...

Automated image analysis of textile surfaces allowed determination and quantification of intrinsic yarn path variabilities in a 2/2 twill weave during the lay-up process. The yarn paths were described in terms of waves and it was found that the frequencies are similar in warp and weft directions and hardly affected by introduced yarn path deformations. The most significant source of fabric vari...

This paper describes various illumination and image processing techniques for yarn characterization. Darkfield and back-lit illuminations are compared in terms of depth of field tolerance and image quality. Experiments show that back-lit illumination is superior in terms of depth of field tolerance and contrast. Three different back-lit illumination configurations are studied: one simply employ...

Automatic handling of many types of food materials are required to realize the automation of production of commercially prepared box lunches. A printable soft gripper was developed for food handling which is simple to produce with a 3D printer. However, the sensing ability of the printable soft gripper was not discussed in previous research. In this paper, a novel method for estimating the gras...

As one of the most complex steps in fabric production, sizing plays a very important role in the weaving process. The primary purpose of the sizing process is to obtain the warp threads that can successfully be woven without major damages which occur during the yarn passage through sliding metal parts of the weaving machine (Lord, 2003). It applies to the improvement of physical and mechanical ...

in this paper, finite element model of woven fabric target has been investigated which is impacted by a cylindrical projectile. fabrics are impregnated with shear thickening fluid (stf). the effects of the (stf) have been considered as frictional effect. the stf has been made (nano silica and polyethylene glycol (peg)) and then diluted by ethanol proportion of 3:1. yarn pulling out test from in...

Problem statement: The objective of this study is to compare the methods for approximating the positions of twist fiber in yarn structures. Computer Aided Design (CAD) is applied using parametric equation, spline curve and NURBS curve. The ideal twist fiber and fiber migration are studied in 3 dimensions. Approach: The fiber positions in yarn structures were measured by trace fiber technique. T...

In this paper, the ultraviolet protection factor (UPF) of plain knitted fabrics made from 20Ne cotton yarns, Coolmax yarn and their combinations in wet, relaxed and stretched states were studied. According to the fiber composition, fabric samples are divided into three groups including Group I (single cotton yarn), Group II (cotton/cotton combination) and Group III (Coolmax/cotton combination) ...