Distribution of residual stresses arising after welding is quite complex and inhomogeneous. Many factors have influence on the magnitude and the profile of the stress distribution curve. In the present paper an x-ray technique was used to analyze the residual stress distribution in steel sheets jointed by industrial welding with linear or circular weld seams. Interpretation of experimental resu...

TIG welding is an arc-welding process that produces coalescence of metals by heating them with an arc between a non-consumable tungsten electrode and the base metal 1 . Many delicate components in aircraft and nuclear reactors are TIG welded due to its reliability. Basically, TIG weld quality is strongly characterized by the weld pool geometry as shown in Figure 1. This is because the weld pool...

Electron beam butt welding of stainless steel (SS 304) and electrolytically tough pitched (ETP) copper plates was carried out according to central composite design of experiments. Three input parameters, namely accelerating voltage, beam current and weld speed were considered in the butt welding experiments of dissimilar metals. The weld-bead parameters, such as bead width and depth of penetrat...

Real-time estimation of weld quality from process data is one of the key objectives in current weld control systems for resistance spot-welding processes. This task can be alleviated if the weld controller is equipped with a voltage sensor in the secondary circuit. Replacing the goal of quantifying the weld quality in terms of button size by the more modest objective of indirect estimation of t...

The distortion of laser welded titanium plates was assessed for different operating conditions of the laser welding device, and with different welding parameters (in terms of weld point and prewelding). In this study, Nd : YAG laser welding device was used to join the titanium plates. The results showed that distortion increased stepwise after each welding point along the welding zone (one-side...

Neural network modelling has been applied to search for novel high strength steel weld metal compositions, potentially offering improved tolerance to variations in the weld thermal cycle. An experimental 7 wt% Ni manual metal arc electrode, formulated on these predictions, was used to produce all-weld metals and welds in high strength steel. Mechanical properties were correlated to weld metal m...

This paper describes a method for non-destructive evaluation of the quality of welds from 3D point data. The method uses a stereo camera system to capture high-resolution 3D images of deposited welds, which are then processed in order to extract key parameters of the welds. These parameters (the weld angle and the radius of the weld at the weld toe) can in turn be used to estimate the stress co...

Visual sensing technology is widely used in welding practices because visual devices are decreasing in price, increasing in reliability and improving in image processing hardware and software. As the most studied welding sensor, CCD(Charge Coupled Device) is more suitable for quality control of welding process than other means of sensing devices because it can obtain both two dimensional and th...

In December 2006, the Boiling Water Reactor Vessel and Internals Project (BWRVIP) issued a letter mandating two-sided coverage for the volumetric examination of BWR core shroud welds. In this letter, they noted that: “Ultrasonic flaw detection and sizing performance is degraded by stainless steel or nickel allow weld metal. The base metal examination volumes on both sides of the weld should be ...