Power ratios were derived from the principle of ultrasonic Doppler velocimetry to determine a ratio of the volume of vortices to the total vessel volume under the ultrasonic beam. This ratio also equals the ratio of the cross-sectional area of vortices to the vessel lumen. In vitro pulsatile flow experiments were performed in a Reynolds number range of 1,230-4,320 with axisymmetric constriction...

Using a broadband through-transmission technique, the attenuation coefficient and phase velocity spectra have been measured for a set of multi-wall carbon nanotube (MWCNT)-nylon composites (from pure nylon to 20% MWCNT by weight) in the ultrasonic frequency band from 4 to 14 MHz. The samples were found to be effectively homogeneous on spatial scales from the low end of ultrasonic wavelengths in...

This paper presents a method for ultrasonic characterization of porous silicon in which a genetic algorithm based optimization is used to solve the inverse problem. A one dimensional model describing wave propagation through a water immersed sample is used in order to compute transmission spectra. Then, a water immersion wide bandwidth measurement is performed using insertion/substitutionmethod...

Microscopic structure in bubbly flows is a topic of interest in the study of fluid flows. In the present paper, the Ultrasonic Doppler Method was applied to the measurement of bubbly flows from which Reynolds stress profiles were obtained. Experiments were carried out for an air-water dispersed bubbly flow in a 20mm x 100 mm vertical rectangular channel having a void fraction smaller than 3%. T...

In this paper a previously developed theoretical model of the measurement process performed by a transittime ultrasonic anemometer is applied to a fluid flowing through a circular section pipe. This model considers the influence of the shift of the acoustic pulse trajectory from straight propagation due to the flow on the measured speed. The aim of this work is to estimate the errors induced in...

Ultrasonic pulse velocity technique is one of the most popular non-destructive techniques used in the assessment of concrete properties. However, it is very difficult to accurately evaluate the concrete compressive strength with this method since the ultrasonic pulse velocity values are affected by a number of factors, which do not necessarily influence the concrete compressive strength in the ...

The study of Taylor-Couette vortex flow with small aspect ratio is great interesting. Additionally, the importance of magnetic fluids has been increasing in the engineering applications of various fields, and this leads to increase the interests to investigate the flow of magnetic fluids, which have the reactivity to magnetic field. Then Taylor-Couette vortex flow with magnetic fluids is expect...

Launch vehicles use ablative nozzle liners to function under very high thermal and erosive environments. In solid motor nozzle throats, graphite or carbon phenolic materials are used because of their high heat of ablation and erosion resistance. Ultrasonic testing is implemented as the primary NDT technique for throat insert liners by almost replacing radiography testing. Though introduced for ...

In this study, using methacrylic and ascorbic acid in gelatin initiated by copper (MAGIC-f) polymer gel after megavoltage energy exposure, the sensitivity of the ultrasound velocity and attenuation coefficient dose-dependent parameters was evaluated. The MAGIC-f polymer gel was irradiated under 1.25 MeV cobalt-60, ranging from 0 to 60 Gy in 2-Gy steps, and received dose uniformity and accuracy ...

Ultrasonic measurement techniques for velocity estimation are currently widely used in fluid flow studies and applications. An accurate determination of interfacial position in gas-liquid two-phase flows is still an open problem. The quality of this information directly reflects on the accuracy of void fraction measurement, and it provides a means of discriminating velocity information of both ...