At low Reynolds numbers, laminar-turbulent transition occurs on the suction side of high-lift low-pressure turbine blades. The prediction of this flow is an important step in low-pressure turbine design. Thus the laminar-turbulent transition must be modeled or resolved. The flow around the high-lift low-pressure turbine blade T106C is predicted using RANS simulations, without and with transitio...

Micro-scale silicon heat exchangers were designed, modeled using conventional heat transfer and fluid mechanics correlations, fabricated in the MIT Microtechnologies Laboratory, and tested as part of the MIT micro-gas turbine engine project. Heat transfer and pressure drop experiments were carried out to measure the performance of these heat exchangers, and to validate the predictions of the mo...

Tidal stream turbines (TSTs) produce a rotating downstream wake. This paper describes the characteristics of the swirl flow in the wake of a TST with a view of comparing these against classical swirl theory and investigating whether swirl is an important factor in wake recovery prediction. Using computational fluid dynamics the paper describes the characteristics of velocities, pressure drop, v...

..̂IJ Previous papers described the Phase IA tests of the Rocketdyne configuration of the Space Shuttle Main Engine (SSME) High Pressure Fuel Turbopump (HPFTP) turbine with rough coated flight engine rotor blades and with polished coated rotor blades at Marshall Space Flight Center (MSFC) . The testing involved using scaled performance parameters and model measurements to determine the performan...

Determination of the starter torque-speed diagram is a major task in the design or selection of a proper gas turbine starter. In this paper, the maximum power of the MGT-40 gas turbine starter was calculated based on the dynamics of the rotor, start-up logic, and compressor map. In a recent research, the pressure ratio was assumed as a linear function of the rotor speed and the required starter...

In this paper, experimentally derived correlations of heat transfer and pressure drop are used in a Pareto based Multi-Objective Optimization (MOO) approach to find the best possible combinations of heat transfer and pressure drop of TiO2-water nanofluid flow in tubes fitted with multiple twisted tape inserts in different arrangement. In this study there are four independent design variables: t...

In this study, the pressure drop for the binary mixtures of particles differing in size and density in a pseudo-2D spouted bed was experimentally studied. A binary mixture of solid particles including sand, Gypsum, and polyurethane was used in the experimental setup. Effects of static bed height, cone angle, particles diameter, and a particles weight fraction on the bed pressure drop were e...

In this paper, fluid flow and heat transfer in the laboratory (small size) shell tube heat exchanger are analysed by computational fluid dynamic software. In this type of shell tube heat exchanger baffles with different angles of rotation: 00 (horizontal segmental baffle), 150 (from horizontal), 300, 450, 600, 750, 900 (vertical segmental baffle) is used. Effect of baffle orientation on shell t...