Wire electro-discharge machining (WEDM) is a fully extended and competitive machining process widely used for hard and difficult to machine materials. In the present research, experimental investigation have been conducted to find out the wire wear rate at different machining parameter Such as peak current, pulse on time, pulse off time, based on full factorial design of experiment. Molybdenum ...

The effects of applied load, sliding speed and sliding distance on the dry sliding wear behavior of aged Al-SiCp-Gr composites were investigated. The specimen were fabricated by stir-casting technique. The pin-on-disc wear testing machine was used to investigate the wear rate by design of experiments based on L27 using Taguchi technique. Sliding distance was the most important variable that inf...

This paper presents investigations on turning Ti–6Al–4V alloy withmulti-layer coated inserts. Turning of Ti–6Al–4V using uncoated, TiAlN coated, and TiAlN + cBN coated single and multi-layer coated tungsten carbide inserts is conducted, forces and tool wear aremeasured. 3D finite elementmodelling is utilized to predict chip formation, forces, temperatures and tool wear on these inserts. Modifie...

The stochastic nature of tool life using conventional discrete-wear data from experimental tests usually exists due to many individual and interacting parameters. It is a common practice in batch production to continually use the same tool to machine different parts, using disparate machining parameters. In such an environment, the optimal points at which tools have to be changed, while achievi...

This paper is well targeted in researching several researches of various tool wear monitoring methods in domestic and foreign. Five important tool wear methods are deeply investigated and described in detail. Through comparing the advantages and disadvantages of each monitoring method according to practical application, and draw a conclusion that the based on multi-sensors method is considered ...

This paper presents investigations on hard turning with variable edge design PcBN inserts. Turning of hardened AISI 4340 steel with uniform and variable edge design PcBN inserts is conducted, forces and tool wear are measured. 3D finite element modelling is utilized to predict chip formation, forces, temperatures and tool wear on uniform and variable edge micro-geometry tools. Predicted forces ...

background: some studies have shown that casein phosphopeptide-amorphous calcium phosphate (cpp-acp) and acidulated phosphate fluoride (apf) gel can protect teeth against erosion. the aim of this study was to assess whether cpp-acp and fluoride could reduce enamel wear rates under erosive conditions simulating abrasion and acidic diet regimen. materials and methods: enamel specimens consisted o...

Using acoustic emission (AE) signals to monitor tool wear states is one of the most e€ective methods used in metal cutting processes. As AE signals contain information on cutting processes, the problem of how to extract the features related to tool wear states from these signals needs to be solved. In this paper, a wavelet packet transform (WPT) method is used to decompose continuous AE signals...

Cutting tool wear is found to be the major cause affecting the finished product in term of surface finish quality, dimensional precision and the cost of the defect. This paper proposes the development of a reliable machine condition monitoring system by using a low-cost piezoelectric sensor to monitor the flank wear progression on the cutting tool. The wear of the cutting insert was measured an...

ABSTRACT Inconel 718 is a difficult-to-cut nickel-based superalloy commonly used in aerospace industry. This paper presents an experimental study of the tool wear propagation and cutting force variations in the end milling of Inconel 718 with coated carbide inserts. The experimental results showed that significant flank wear was the predominant failure mode affecting the tool life. The tool fla...