Experimentally determined natural frequencies and modes shapes are presented for an elastically point-supported isotropic plate with attached masses under impulsive loading. These results are compared to frequencies and to modes shapes determined from the Rayleigh–Ritz method and a finite element analysis using COMSOL. Accelerometers mounted at three locations on the plate, provide input for ME...

We analyze the initiation and propagation of adiabatic shear bands in a thick-walled 4340 steel tube with a V-notch in the middle. The material is modeled as strain hardening, strain-rate hardening and thermal softening. The deformations are assumed to be locally adiabatic and the effect of inertia forces is considered. Two different loadings, i.e., torsional, and combined torsional and axial p...

Application of impact energy absorption systems in different industries is of special significance. Thin-walled tubes, due to their lightness, high energy absorption capacity, long crushing length and the high ratio of energy absorption to weight, have found ever-increasing application as one of the most effective energy absorption systems. In this research, through  carrying out experimental t...

This paper presents a procedure to determine an element-length dependent strain and stress relation until fracture that is suitable for implementation in finite element models. This material relation is obtained experimentally with an optical measuring system. The strain until fracture is calculated from the measured surface displacements. The stress is derived from the measured force and the c...

Based on the hypothesis that multi-corner and multi-cell structures can effectively improve energy absorption behavior, this paper designed a circumferentially corrugated tube (MCCT) for absorption. The MCCT was as variable thickness form to study influence of materials distribution cross section performance investigated under impact condition with finite element simulation validated by drop ha...

A critical challenge to translating field effect transistors into biochemical sensor platforms is the requirement of a gate electrode, which imposes restrictions on sensor device architectures and results in added expense, poorer scalability, and electrical noise. Here we show that it is possible to eliminate the need of the physical gate electrode and dielectrics altogether using a synthetic t...

The filling of thin-walled steel tubes with quartz sand can help to prevent the premature buckling of the steel tube at a low cost. During an impact, the internal stress of the quartz sand-filled steel tube column is subjected to not only axial force but also lateral confining force, resulting in complicated internal stress. A suitable sensor for monitoring the internal stress of such a structu...

This paper deals with the effect of process parameters on the peak load and the energy absorption of the expansion of thin walled tubes using a die. The energy absorption and peak load during the expansion process were calculated for various punch angles (α) and with different expansion ratios (rp/ro) at different temperatures (T) by finite element analysis where rp is the punch outer radius an...