The aim of this study was to prepare liposomes of acyclovir (ACY) by thin layer evaporation (TLE) and reverse phase evaporation (REV) methods. Twenty-seven batches of liposomes from each method were prepared using technique of three variables at three levels (33) factorial design. Drug/Lipid (molar ratio), hydration volume and hydration time were considered three independent variables in TLE me...

in this research the thin layer drying behavior of apricot (cv. ghavami and nasiry) at temperatures of drying air of 40, 50, 60 and 70 ºc and at drying air velocity of 2 ms-1 was studied. in order to select the best drying curve equation, 9 different thin layer drying models were fitted to the experimental data and were compared according to their coefficient of determination (r2), reduced chi-...

This Letter demonstrates a strategy for producing bulk quantities of high quality, dimensionally uniform single-crystal silicon micro- and nanoribbons from bulk silicon (111) wafers. The process uses etched trenches with controlled rippled structures defined on the sidewalls, together with angled evaporation of masking materials and anisotropic wet etching of the silicon, to produce multilayer ...

We report a facile and low-cost method to directly exfoliate graphite powders into large-size, high-quality, and solution-dispersible few-layer graphene sheets. In this method, aqueous mixtures of graphite and inorganic salts such as NaCl and CuCl2 are stirred, and subsequently dried by evaporation. Finally, the mixture powders are dispersed into an orthogonal organic solvent solution of the sa...

We report a detailed investigation of the structural and chemical characteristics of thin evaporated Al2O3 tunnel barriers of variable thickness grown onto single-layer graphene sheets. Advanced electron microscopy and spectrum-imaging techniques were used to investigate the Co/Al2O3/graphene/SiO2 interfaces. Direct observation of pinhole contacts was achieved using FIB cross-sectional lamellas...

This paper demonstrates the use of poly(dimethylsiloxane) (PDMS), polyurethane (PU), epoxy, and poly(methyl methacrylate) (PMMA) as mandrils to fabricate metallic heat exchangers having 300–700 m internal channels. The mandrils were prepared using two soft lithographic techniques-replica molding, and microembossing. To fabricate the heat exchangers, the polymeric mandrils were coated with a thi...

Ahlberg, P. 2016. Graphene Implementation Study in Semiconductor Processing. Digital Comprehensive Summaries of Uppsala Dissertations from the Faculty of Science and Technology 1377. 62 pp. Uppsala: Acta Universitatis Upsaliensis. ISBN 978-91-554-9585-5. Graphene, with its two-dimensional nature and unique properties, has for over a decade captured enormous interests in both industry and academ...

A Si/SiO(2)/CuPt structure is formed by depositing a very thin SiO(2) layer between CuPt and P-type Si layers using e-beam evaporation. SEM images show the formation of CuPt nano clusters with an average size of less than 100 nm. This structure shows high sensitivity to applied magnetic fields at 77K and at low and high dc voltages such that magnetic field as low as 6 mT is detected using I-V a...

It is important to research the dependence of capacitance and on parameters photodiodes. In this article, we aim experimental theoretical nCdSpSi heterostructure. A heavily doped n+CdS layer with a thickness about 50 Å was created by deposition thin indium (In) for 25-30 s surface CdS film in vacuum residual pressure 10-5Torr at substrate temperature 373 K, followed annealing 673 K within 300s....

In this paper, the top-contact (TC) pentacene-based organic thin-film transistor (OTFT) with a tetrafluorotetracyanoquinodimethane (F₄TCNQ)-doped pentacene interlayer between the source/drain electrodes and the pentacene channel layer were fabricated using the co-evaporation method. Compared with a pentacene-based OTFT without an interlayer, OTFTs with an F₄TCNQ:pentacene ratio of 1:1 showed co...