A collimator is often used to clean a beam of its excessive tail particles. If the beam intensity is high enough or if the beam is brought too close to the collimator, however, the wakefields generated by the beam-collimator interaction can cause additional beam tails to grow, thus defeating, or even worsening, the beam-tail cleaning process. The wakefield generated by a sheet beam moving past ...

High-power high-brightness unstable-resonator edge-emitting semiconductor laser diodes with dry-etched curved mirrors were fabricated and characterized. The epitaxial structure was optimized for high output power operation and consists of a GaAs/AlGaAs gradedindex separate-confinement heterostructure (GRINSCH) with a single 980-nm-emitting InGaAs quantum well. The curved mirrors of the unstable...

Energy gain of trapped electrons in excess of 20 MeV has been demonstrated in an inverse-free-electron-laser (IFEL) accelerator experiment. A 14.5 MeV electron beam is copropagated with a 400 GW CO2 laser beam in a 50 cm long undulator strongly tapered in period and field amplitude. The Rayleigh range of the laser, approximately 1.8 cm, is much shorter than the undulator length yielding a diffr...

We report on the design and performance of a ZnSe tetra-prism for homogeneous substrate heating using a continuous wave CO(2) laser beam in pulsed laser deposition experiments. We discuss here three potential designs for homogenizing prisms and use ray-tracing modeling to compare their operation to an alternative square-tapered beam-pipe design. A square-pyramidal tetra-prism design was found t...

We present an Inverse Free Electron Laser accelerator proposed for construction at the UCLA Neptune Laboratory. This experiment will use a 1 TW CO2 laser to accelerate through two strongly tapered undulators an electron beam from 16 MeV up to 55 MeV. The scheme proposed is the diffraction dominated IFEL interaction. The Raleigh range of the laser beam is about 2 cm, much shorter than the intera...

This study presents an efficient beam formulation for static and vibration analysis of 2D non-prismatic beams with the kinematic assumptions Timoshenko theory. Beams having complex configurations can be straightforwardly constructed by using B-spline basis functions, which are used descriptions axis sectional height. feature enables free-form strong curvatures to performed conveniently accurate...

We report on a series of measurements of the transverse wakefield from tapered collimators. The collimators were designed to principally present a geometric impedance to the beam, and to minimize impedances from resistivity or surface features; in addition, the geometries of the collimators were selected to permit examination of the scaling behavior of the wakefield due to collimator taper angl...

A high temperature cured self-healing epoxy is demonstrated by incorporating microcapsules of poly (dimethylsiloxane) (PDMS) resin and separate microcapsules containing an organotin catalyst. Healing is triggered by crack propagation through the embedded microcapsules in the epoxy matrix, which releases the healing agents into the crack plane initiating crosslinking reactions. A series of taper...