نتایج جستجو برای: strain energy release rate serr
تعداد نتایج: 1932433 فیلتر نتایج به سال:
The electron shuttle heme protein Cyt-c(6) from the photosynthetic cyanobacterium Nostoc sp. PCC 7119 was immobilized on nanostructured Ag electrodes coated with SAMs that mimic different possible interactions with its natural reaction partner PSI. The structure, redox potential, and electron-transfer dynamics of the SAM-Cyt-c(6) complexes were investigated by TR-SERR spectroelectrochemistry. I...
The fracture of SAC305 solder was investigated as a function of strain rate using Cu-solder-Cu double cantilever beam (DCB) specimens joined with a series of 2 mm long discrete solder joints of 150 m thickness. The joints were then fractured with various strain rates under mode I and mixed-mode loading conditions. The failure of each joint in the DCB was accompanied by a sharp drop in the appli...
Simulations of forced ignition of non-premixed laminar counterflow flames are used to study the effect of strain rate on ignition success. A one dimensional calculation is performed, using detailed methane chemical kinetics and treating the spark as an instantaneous heat release in an inert mixing layer. Ignition success depends on the mixture composition at the spark location, resulting in lea...
Deterrents are materials that use in gun propellant formulations as controlling initial burning rate and to prevent of high chamber pressures in the interior ballistic. However, traditional deterrents are highly toxic and suspected carcinogen which makes them chemicals of concern that are non-energetic inert compound and reduce total chemical energy of propellant and reduce final performance of...
Over fifty bacterial strains were isolated from seawater samples in the presence of naphthalene as a sole source of carbon and energy. Among them, three isolates with higher growth rate and naphthalene degradation ability were selected for further studies. Biochemical and molecular analysis revealed that two Persian Gulf isolates, strain PG-10 and strain PG-48 belonged to the group of hydrocarb...
An Al-Mg-Si-Cu alloy was subjected to tensile testing, both under solutionized and ECAE-ed conditions, using strain rates of 10-4 s-1 to 10-1 s-1 at temperatures of 25 ˚C to 325 ˚C to investigate the dynamic strain aging (DSA) phenomenon in the alloy. Negative strain rate sensitivity (m) and increasing ultimate tensile stress were observed in the DSA region with increasing temperature . Regardi...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید