a constitutive model based on two–dimensional unstructured galerkin finite volume method (gfvm) is introduced and applied for analyzing nonlinear behavior of cracked concrete structures in equilibrium condition. the developed iterative solver treats concrete as an orthotropic nonlinear material and considers the softening and hardening behavior of concrete under compression and tension by using...

The stiffness of articular cartilage is a nonlinear function of the strain amplitude and strain rate as well as the loading history, as a consequence of the flow of interstitial water and the stiffening of the collagen fibril network. This paper presents a full investigation of the interplay between the fluid kinetics and fibril stiffening of unconfined cartilage disks by analyzing over 200 cas...

this study contains the identification of modal dynamic properties of a 3-story large-scale steel test frame structure through shaking table measurements. shaking table test is carried out to estimate the modal properties of the test frame such as natural frequencies, damping ratios and mode shapes. among many different model structures, arx (auto recursive exogenous) model structure is used fo...

Old Reinforced Concrete (RC) buildings are facing different degrees of structural deterioration and require proper strengthening to enhance their performance as well extend life span. Fabric reinforced Alkali-Activated Slag (AAS) matrix is proposed strengthen RC beams in this study. Seven with without were prepared tested under four-point bending. Test results indicate that use AAS replacement ...

This study investigates soft composite sheets that undergo significant deformations. The fiber reinforcement in these systems not only increases the stiffness of sheets like a traditional composite, but also controls the relationships between strains in orthogonal planar directions. Such an ability is useful in controlling the deformation of soft robots, and also enhancing the output of soft ac...

Solid-extracellular fluid interaction is believed to play an important role in the strain-rate dependent mechanical behaviors of shoulder articular cartilages. It is believed that the kangaroo shoulder joint is anatomically and biomechanically similar to human shoulder joint and it is easy to get in Australia. Therefore, the kangaroo humeral head cartilage was used as the suitable tissue for th...

This paper presents an experimental and numerical study of unidirectional carbon fiber composites with a silicone matrix, loaded transversally to the fibers. The experiments show nonlinear behavior with significant strain softening under cyclic loading. The numerical study uses a plane-strain finite element continuum model of the composite material in which the fiber distribution is based on ex...

In this paper, following a two-stage methodology, the differential quadrature element (DQE) model of a three-story frame structure is updated for the vibration analysis. In the first stage, the mass and stiffness matrices are updated using the experimental natural frequencies. Then, having the updated mass and stiffness matrices, the structural damping matrix is updated to minimize the error be...

In this study, the nonlinear mechanical behavior and corresponding damage mechanisms of C/SiC composites during cyclic loading/unloading tensile tests were studied. Besides, based on composite microstructure mechanisms, evolution model single fiber unit are proposed to explain stiffness degradation, inelastic deformation accumulation, elastic deformation. According degradation law, Weibull fail...