Molecular simulations and an energy landscape analysis are used to investigate the effects of shear on aging in a glass. Shear beyond the yield point is shown to change the state of a glass such that it resembles (but is not identical to) a different stage in the aging process. A cycle of large strain rejuvenates the glass by relocating the system to shallower energy minima, while a cycle of sm...

This study investigated the effects of aging and fat content on the texture of Cheddar cheese, both mechanical and sensory aspects, over a 9-mo aging period. Cheeses of 6, 16, and 33% fat were tested at 0.5, 3, 6, and 9 mo of aging. Cheeses were evaluated by a trained sensory panel using an established texture lexicon as well as instrumental methods, which were used to probe cheese structure. S...

Novel and highly sensitive static strain interrogation technique is demonstrated, where the sensing element is a fiberBragg grating (FBG) and the light source is a frequency-locked diode laser. Locking the laser frequency to the center of an absorption line (atomic line of potassium in our experiment) eliminates the slow frequency drift of the laser. The stabilized laser source is used to measu...

We test the quasiequilibrium picture of the aging dynamics--strictly valid in the asymptotic dynamical regime of aging systems--in the preasymptotic aging regime of the two-dimensional Edwards-Anderson spin glass model. We compare the fluctuation-dissipation characteristic for spin autocorrelation function and response with a corresponding one obtained for a suitably defined correlation functio...

This technical note presents the results of a field investigation into pile aging in soft clay which was conducted over a period of ten years. Static load tests were conducted after the excess pore pressure generated by the installation of 6 m long driven concrete piles were fully equalised. These tests allowed the time-capacity aging profile to be established. A normalised capacity-time trend ...

dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500c. stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500c, and smooth flow at the other temperatures. both yield and ultimate tensile strengths increased with increasing testing temperature up to about 4500c and then decreased at h...