Self-Compacting concrete (SCC) needs no external vibration and compacts fully under its self weight. This paper describes experimental work carried out to develop SCC and to study the effect of different sizes (i.e., 20mm; 16mm; 12.5mm and 10mm) of coarse aggregate (C.A) on the properties of SCC. Eight mixes were investigated for M30 grade concrete. The water-powder ratio was kept fixed through...

Pressurized water reactor (PWR) cores operate under extreme environmental conditions due to coolant chemistry, operating temperature, and neutron exposure. Extending the life of PWRs requires detailed knowledge of the changes in mechanical and corrosion properties of the structural austenitic stainless steel components adjacent to the fuel (internals) that are inherent to such conditions. This ...

Results The USP Class I Min. Avg. 2-0 Suture Knot-Pull Tensile Strength (Doubled for Loop Test) is defined as 2.88 kgf. The Tensile Strength of Lot # 1-9364 was 4,7761 ± 0,2005 kgf (mean ± std dev) min 4.2282, max 5.2289, and for Lot # 1-9364 was 5,5151 ± 0,2625 kgf (mean ± std dev) min 4,0044, max 5,1356, respectively. There were no statistically signiffcant differences between the both lots (...

This experimental investigation is to study the effects of replacement of cement (by weight) with five percentage of fly ash and the effects of addition of steel fiber composite. A control mixture of proportions 1:1:49:1.79 with w/c of 0.45 was designed. Cement was replaced with five percentages (10%, 15%, 20%, 25% & 30%) of Class C fly ash. Four percentages of steel fibers (0.15%, 0.30%, 0.45%...

objective: among the various impression materials, for alginate tear strength is probably more important than the compressive strength. the tear strength is important when an impression involves a mechanical undercut and/or lacks bulk strength to resist tearing. this study evaluated tear strength of iralgin and compared it with tear strength of alginoplast. methods: in this invitro experimental...

We present a multiple-scale approach for the analysis of tensile failure of concrete under impact loading. A phenomenological rate dependent constitutive model is applied at the macroscopic level. Viscosity terms are included to represent the strengthening effect associated with the microstructural moisture and inertial effects of micro-cracking. A partial length scale effect is extracted from ...

Stresscoat,” a n industrial technique for showing sites of highest tensile strain and failure in machine parts, has been used for similar purposes in intact living and cadaver bones. Stresscoat cracks only arise from tensile struin in the underlying material and always lie transverse to the direction of the strain. Stresscoat and split-line patterns do not represent stress trajectories. A traje...

In this paper, a compression-to-tensile load converter device is developed to determine the anisotropic tensile strength of brittle material. A cubic sample with an internal pore was used as the test specimen, and a series of finite element analysis and DDM simulations were performed thereafter to analyse the effect of pore dimensions on the stress concentration, as well as to render a suitable...

Xylan extracts from southern US hardwood were used for the adsorption of both hardwood and softwood pulp. Pulp beatability and physical strength properties were determined and compared with those of the conventional Kraft pulp and pre-extracted modified Kraft pulp. The results indicated that hemicelluloses adsorption greatly improved pulp beatability. Compared to conventional Kraft pulp, a sign...

In this study, age hardenable material Aluminum alloy Al-7075-T6 (aged) was investigated for weldability. Al-7075-T6 plates were subjected to Al-7075-0 heat treatment and were joined with different welding parameters by means of friction stir welding method. After Joining, the parts which were subjected to tensile and bending tests were examined. As a result of the studies, it was observed that...