in internal combustion engines, only about a third of the total fuel input energy is converted into useful work. if the energy rejected into the cooling system and the exhaust gases could be recovered instead and put into useful work, fuel economy would have been substantially improved. the main aim of this research paper was to evaluate the effects of the hybrid nano-catalyst containing cerium...

Biogas derived from organic wastes is considered as good alternative to petroleum fuels. It can be used in compression ignition (CI) engines, because of its better mixing ability with air and clean burning nature. Biogas is produced by anaerobic digestion of various organic substances such as kitchen wastes, agricultural wastes, municipal solid wastes, cow dung etc., in absence of oxygen, which...

A computer controlled direct gasoline fuel injection (DGI) system has been modeled, programmed and constructed for a four-stroke SI engine. Locally available materials have been used for this experimental model. All the old model vehicle were equipped with carburetor for air fuel mixing and later on electronic fuel injection system has been introduced for maintaining better air fuel ratio and m...

In order to maintain cab comfort truck drivers have to idle their engine to obtain the required power for accessories, such as the air conditioner, heater, television, refrigerator, and lights. This idling of the engine has a major impact on its fuel consumption and exhaust emission. Idling emissions can be as high as 86.4 g/h, 16,500 g/h, 5130 g/h, 4 g/h, and 375 g/h for HC, CO2, CO, PM, and N...

In the present study emission performance of a diesel engine (Lister Petter) was evaluated at different compression ratios and engine loads with soybean methyl ester and its 25%, 50%, 75% blends with diesel fuel at constant speed 1500 rpm. Exhaust emissions included CO, CO2, HC and NOx. The compression ratio and engine load varied from 14 to 20 with an interval 1 and 25 to...

Start of fuel injection and fuel type are two important factors affecting engine performance and exhaust emissions in internal combustion engines. In the present study, a one-dimensional computational fluid dynamics solution with GT-Power software is used to simulate a six-cylinder diesel engine to study the performance and exhaust emissions with different injection timing and alternative fuels...

Increased energy demand and the concern about environment friendly technology, renewable bio-fuels are better alternative to petroleum products. In the present study linseed oil was used as alternative source for diesel engine fuel and the results were compared with baseline data of neat diesel. Performance parameters such as brake thermal efficiency (BTE) and brake specific fuel consumption (B...

The challenge for Automobile is present emission norms that demands engine for green environment with high performance and low emission. The Low Heat Rejection Engine (LHR Engine) is a technology, which minimizes heat loss to the coolant by providing heat resistance in the heat flow to the coolant. As LHR Engine is used, the heat is not transferred to the surroundings. Another method to improve...

In the current work, a comprehensive study on the possibility of using methanol as an alternative fuel for diesel engines was carried out. Methanol was mixed at different ratios with diesel fuel. The mixing ratios of methanol to diesel were 0:100, 10:90, 20:80 and 30:70. The effects of methanol fraction on engine power, torque, brake specific fuel consumption (BSFC), brake thermal efficiency an...

Small diesel engines are widely used for commercial vehicle and passenger car applications due to their higher torque requirements, fuel economy, and better thermal efficiency. These engines are exposed to different operating and environmental conditions and hence emissions from these engines are erratic. Strategies are required to enhance performance and reduce engine-out emissions considering...