Several methodologies and techniques are currently available so as to dissipate energy in engineering systems; most of them are either not re-usable, or complex in mechanism. This paper introduces an innovative re-usable energy absorption device, based upon the working principles of Equal Channel Angular Extrusion, and known as UREAD (Universal Re-usable Energy Absorption Device). This study co...

A novel method for applying cavity ring-down spectroscopy in the liquid phase, compatible with LC analyses, is presented. The core of the setup is a home-built cavity ring-down flow cell (cell volume 12 microL) that is constructed using a silicon rubber spacer, which is clamped leak-tight between two high-reflectivity mirrors. The mirrors are in direct contact with the liquid flow, which provid...

BACKGROUND After total laryngectomy and voice rehabilitation using a tracheoesophageal shunt valve, patients often have valve-related complications such as leakage. To solve these problems, a tracheoesophageal tissue connector (TE-TC) was devised to serve as an interface between the patient's tissue (trachea and esophagus) and the shunt valve. METHODS The TE-TC is a permucosal connection cons...

Rubber dam is considered an ideal device for tooth isolation. Nevertheless, its usage is quite rare in the Czech Republic. The aim of this study was: firstly, to gather and evaluate information regarding the use of rubber dam by dentists in the Czech Republic and to compare it with other countries; secondly to find out whether there are any influencing factors as to rubber dam usage; and finall...

Nowadays, the study of preparing silica/rubber composites, which can be used in “green 16 tire”, in energy saving method is fast-growing. In our work, silica modified by using alcohol 17 polyoxyethylene ether (AEO) and 3-Mercaptopropyltriethoxysilane (K-MEPTS) together were 18 investigated. Thermal gravimetric analyzer (TGA) result indicated that both AEO and K-MEPTS 19 could be grafted on the ...

In this assessment, hybrid composites were prepared from the combination of industrial waste, as marble waste powder (MWP) with conventional fillers, carbon black (CB) as well as silica as reinforcing material, incorporated with natural rubber (NR). The properties studied were curing, mechanical and swelling behavior. Assimilation of CB as well as silica into MWP containing NR compound responde...

Dynamic balance has frequently been evaluated by using center of pressure (COP) during stepping movement. COP sway may be greater during stepping on foam rubber, which is a kind of external load. This study aimed to examine the effect of leg-joint angles and COP sway during stepping on a spot in 13 young male adults (mean age 25.6 ± 4.8 years, mean height 170.6 ± 5.2 cm, mean mass 69.1 ± 8.2 kg...

A prediction method for rubber curing process has historically received considerable attention in manufacturing process for rubber article with relatively large size. In recent years, there exists increasing demand for simulation driven design which will cut down the cost and time required for product development. In case of the rubber with relatively large dimensions, low thermal conductivity ...

In this study, the interaction between the silica filler and polydimethylsiloxanes (PDMS) was investigated from the aspects of the bound rubber and morphological characterization. With special attention to the dynamic properties, the dynamic test was conducted by dynamic shear rheometer. The results show that the modified fillers disperse uniformly within PDMS matrix without aggregation and con...

This paper reports the use of rubber—Polybutadiene as an intermediate adhesive layer for improving the adhesion between polyimide (PI) and silicone polydimethylsiloxane (PDMS) which is required for a reliable fabrication of flexible/stretchable body patches for various applications. The adhesive bond initiated by the butyl rubber (BR), apart from being extremely strong, is also chemically resis...