In laboratory-based biofouling assays, the influence of physico-chemical surface characteristics on barnacle settlement has been tested most frequently using the model organism Balanus amphitrite (= Amphibalanus amphitrite). Very few studies have addressed the settlement preferences of other barnacle species, such as Balanus improvisus (= Amphibalanus improvisus). This study aimed to unravel th...

INTRODUCTION Micro-organism adhesion and plaque formation is affected by surface free energy (SFE), surface roughness, hydrophilicity, surface chemistry, surface charge and the presence of proteins. AIMS The aim of this study was to assess and compare surface characteristics of surgical grade cobalt chromium alloy (CCM) and of commercially pure titanium (cpTi). METHOD Nine metallic cylinder...

Measurement of the wettability of a material is a predictive index of cytocompatibility. This study was designed to evaluate the effect of exposed E-glass fibers and bioactive glass (BAG) particles on the surface wettability behavior of composite implants. Two different groups were investigated: (a) fiber reinforced composites (FRCs) with different fiber orientations and (b) polymer composites ...

The goal of present study was to investigate kinetics of supercritical carbon dioxide (SC CO2) extraction of essential oils from dried clove buds and oregano leaves. Total extract yields after exhaustion of plant material at 10 MPa and 40°C (after consumption of 94.3 kgCO2/kg plant material) were 18.2% and 1.0 %, respectively. Synergistic effect in the extraction process was also investigated u...

OBJECTIVE To test the hypothesis that there are no significant differences in the adhesion of mutans streptococci (MS) to various orthodontic materials based on their surface characteristics. MATERIALS AND METHODS Surface roughness (SR) and surface free energy (SFE) characteristics were investigated for nine different orthodontic materials (four orthodontic adhesives, three bracket raw materi...

Abstract The dependence of stacking fault energy ( $${\gamma }_{\text{SFE}}$$ γ SFE ) on temperature in austenitic Fe–Cr–Ni alloy powders was investigated by situ high synchrotron X-ray diffraction and ab initio calculations the range from − 45 °C to 450 °C. peak ...

This article carried out the extraction of sesame oil by using three extraction techniques: supercritical fluid extraction (SFE), Soxhlet and sequential extraction. The SFE was performed using supercritical carbon dioxide (SC-CO2) as solvent and ethanol as cosolvent. Tests were performed at 20 MPa, 35°C and a flow rate of 2.5 g CO2/min with a total extraction time of 210 minutes. The Soxhlet ex...

At DOE sites, significant amounts of Job Control Waste (JCW) need to be disposed. This JCW is generated and contaminated with polychlorinated biphenyls (PCBs) during clean-up operations. A commercial, plant-based absorbent material, “Toxi-dry”, is used extensively for decontamination and decommissioning of DOE waste sites and is classified a hazardous JCW after use. In this investigation, 1,2,4...

A combined apparatus of a supercritical CO2 extractor (SFE) and a time-of-flight mass spectrometer (TOF-MS) was developed aiming at the direct analysis of extracts. A fused-silica capillary acts as both a pressure restrictor and an effluent injection nozzle into the TOF-MS. The tip of the nozzle was narrowed by melting and abrasion so that a greater pressure drop occurred at the tip. In the TOF...

The polarity of polyurethane coats was studied on the basis of the goniometric method for determination of wetting angle values, on the basis of calculated surface free energy (SFE) values by the van Oss-Good and Owens-Wendt methods, and on the basis of polarity measurements with the use of the (1)H NMR spectra. Test polyurethanes were synthesised in the reaction of methylene diphenyl 4,4'-diis...