Polymer blends of cold water soluble starches (amylose or amylopectin soluble starch) with gelatin were prepared using solvent casting method. The solid state miscibility and polymer-polymer interactions between the constituent polymers were studied by fourier transforms infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorirmetry (DSC), light optical microscopy (OP...

In this study the performance of clay nano-particles on the soil reinforced with Polypropylene fibers (PP-fiber) has been investigated. Also a series of investigations concerning the effect of random orientation of fibers on the engineering behaviour of soil were conducted. Soil mixtures were modified with varying percentages of nanoclay and Fibers. Unconfined compressive strength (UCS), Compac...

This work illustrates the effect of thermal mechanical processing parameters on the microstructure and mechanical properties of the Ti-22Al-25Nb alloy prepared by reactive sintering with element powders, consisting of O, B2 and Ti₃Al phases. Tensile and plane strain fracture toughness tests were carried out at room temperature to understand the mechanical behavior of the alloys and its correlat...

Mechanical alloying and vacuum sintering have been used to produce bulk nanostructured Ti5Si3 and Ti5Si3-15Wt.% Al2O3 nanocomposite. X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) were used to study the microstructural characteristics of the samples. Indentation method was used to calculate hardness, elastic modulus and fracture toughness ...

The process of preparing SiC fiber-reinforced γ-TiAl composites by the conventional methods is difficult and complicated due to high reactivity, melting point poor deformability alloys. In this work, suction casting, a promising method for SiCf/TiAl composite, had been attempted. process, alloy melt was introduced rapidly into mold within pre-arranged fibers that were coated with additional lay...

Shear testing is one of the most complex testing areas where available methods and specimen geometries are different from each other. Therefore, a modified shear test specimen (MSTS) combining the simple uniaxial test with a zone of interest (ZOI) is tested which gives almost the pure shear. In this study, material parameters of polypropylene (PP) and high density polyethylene (HDPE) are first ...

In this paper, experimental and Finite Element Methods have been used to determine mechanical properties of nanocomposites. Standard tensile and compression samples with 0.0, 0.15, 0.25, 0.35, 0.45, and 0.55 weight fraction of Multi-Walled Carbon Nanotube (MWCNT) were prepared and tested. Nanotube weight fraction was varied to investigate the effects of nanotube weight fraction on nanocomposite...

This study investigated the effects of thermal cycling on the tensile strength of dentin. Bovine dentin were divided into 10 groups, which were then subjected to various conditions: intact after preparation, thereby serving as a control; heating in boiling water for 45 minutes; 10,000 thermal cycles in water; 10,000 thermal cycles in PBS; storage in water at 5, 23, or 55 degrees C for two weeks...