in this study, a numerical simulation using the cfd software, fluent, has been conducted to examine the effect of various shapes of the venturi component sections in order to find the optimum venturi specifications to increase the egr rate with minimum pressure loss at the part load operation range. the cfd results reveal that the venturi should be precisely optimized to introduce the required ...

the objective of this work was to develop a new design of an intake manifold through a 1d simulation. it is quite familiar that a duly designed intake manifold is essential for the optimal performance of an internal combustion engine. air flow inside the intake manifold is one of the important factors, which governs the engine performance and emissions. hence the flow phenomenon inside the inta...

in order to reduce wear in gudgeon pin, bush and piston boss lubrication is done. oil used in national engine species was 10w40 with dynamic viscosity 5.5 mpa.s at 140 °c (the working temperature). in order to complete investigation the oil film hydrodynamics analysis in small end of connecting rod, a real full model engine with four cylinders has been simulated by avl excite5.1 software. in th...

Nowadays biodiesel is receiving more attention as a most important renewable energy for using in diesel engines. Inthis research, the application of Response Surface Methodology (RSM) was highlighted to investigate the effects of biodiesel-diesel blends (B0, B20, B50 and B100), engine operating parameters (engine load and  speed) on CO2 emission of a diesel engine. The experiments were conducte...

Investigations were carried out to evaluate the performance of direct injection diesel engine with medium grade low heat rejection (LHR) combustion chamber and 3 mm air gap insulated piston, 3 mm air gap insulated liner, and ceramic coated cylinder head [ceramic coating with the thickness of 500 µ was made on the inside portion of the cylinder head].The engine had different operating conditions...

The effects of unleaded gasoline and unleaded gasoline–ethanol blends on engine performance and pollutant emissions were investigated experimentally in a single cylinder, four-stroke spark-ignition engine with variable engine speeds (2600–3500 rpm). Four different blends on a volume basis were applied. These are E0 (0% ethanol + 100% unleaded gasoline), E3 (3% ethanol + 97% unleaded gasoline), ...

In this study the performance and emissions characteristics of a heavy-duty, direct injection, Compression ignition (CI) engine which is specialized in agriculture, have been investigated experimentally. For this aim, the influence of injection timing, load, engine speed on power, brake specific fuel consumption (BSFC), peak pressure (PP), nitrogen oxides (NOx), carbon dioxide (CO2), Carbon mon...