End anchors have been shown to significantly reduce premature plate end debonding failure of plate bonded strengthened reinforced concrete (r. c.) beams. One of the main interest in designing end anchors is to determine the minimum or optimal length of end anchors for a given thickness and height of the end anchor. This paper presents experimental and numerical studies in determining those opti...

This study focuses on mechanical characterization of carbon fiber reinforced polymer (CFRP) laminates with non-treated and treated multiwalled nanotubes (CNTs) using nitric acid. The CNTs were acid to obtain carboxylic functional group. epoxy resins are mixed 0.3%wt at a constant mixing speed 2000 rpm times varied from 24 96 h. Laminates show an increase in the flexural strength by 17.4 15.3% h...

Original scientific paper Research of bamboo-wood composites compression performance provides a basis for material selections for prestressed glued bamboo-wood beams and other components whose compression is mainly shared by glued bamboo-wooden composites. Four kinds of wood and two kinds of bamboo were selected to comprise 22 groups (6 specimens each group) divided into 4 batches to study the ...

In this study, an experimental program was developed to investigate the flexural behavior of pre-damaged reinforced concrete (RC) beams that had been repaired and strengthened using carbon fiber-reinforced polymer (CFRP) laminates under a monotonic load. Two techniques were used: externally bonded reinforcement (EBR) near-surface-mounted (NSM) reinforcement, repair strengthen tested beams. The ...

Abstract The combination of low clinker high-performance concrete (LCHPC) and ultra-high modulus (UHM) carbon fibre reinforced polymer (CFRP) tendons was recently proposed for prestressed structural elements. 70% reduction in cement content resulting limited creep shrinkage the LCHPC comparison to a conventional (HPC) very high UHM-CFRP tendon stiffness (> 509 GPa) were expected impact mecha...

IMPACT RESISTANT GLASSY POLYMERS: PRE-STRESS AND MODE II FRACTURE FEBRUARY 2013 JARED STEVEN ARCHER B.S., WESTERN WASHINGTON UNIVERSITY M.S., UNIVERSITY OF MASSACHUSETTS AMHERST Ph.D., UNIVERSITY OF MASSACHUSETTS AMHERST Directed by: Professor Alan J. Lesser Model glassy polymers, polymethyl methacrylate (PMMA) and polycarbonate (PC) are used to experimentally probe several aspects of polymer f...

Electrical Resistance Tomography (ERT) offers a non-destructive evaluation (NDE) technique that takes advantage of the inherent electrical properties in carbon fiber reinforced polymer (CFRP) composites for internal damage characterization. This paper investigates a method of optimum selection of sensing configurations for delamination detection in thick cross-ply laminates using ERT. Reduction...

The interlaminar shear response is studied for carbon nanofiber (CNF) modified out-of-autoclave-vacuum-bag-only (OOA-VBO) carbon fiber reinforced plastic (CFRP). Commercial OOA-VBO prepregs were coated with a CNF modified epoxy solution and a control epoxy solution without CNF to make CNF modified samples and control samples, respectively. Tensile testing was used to study the in-plane shear pe...