At present, sustainability is of major importance in the cement industry, and the use of additions such as silica fume as clinker replacement contributes towards that goal. Special foundations, and particularly micropiles, are one of the most suitable areas for the use of sustainable cements. The aim of this research is to analyse the effects in the very long-term (for 600 days) produced by sul...

7 We propose a new method to estimate the initial cement content, water content and free water/cement ratio (w/c) 8 of hardened cement-based materials made with Portland cements that have unknown mixture proportions and 9 degree of hydration. This method first quantifies the composition of the hardened cement paste, i.e. the 10 volumetric fractions of capillary pores, hydration products and unr...

Using the agar diffusion method, we conducted an in vitro study to evaluate the antimicrobial activity of mineral trioxide aggregate (MTA), new endodontic cement (NEC) and Portland cement at different concentrations against five different microorganisms. A base layer was made using Muller-Hinton agar for Escherichia coli (ATCC 10538) and Candida (ATCC 10231). For Actinomyces viscosus (ATCC 1598...

Dental materials based on Portland cement, which is used in the construction industry have gained popularity for clinical use due to their hydraulic properties, the interaction with tooth tissue and their antimicrobial properties. The antimicrobial properties are optimal in vitro. However in clinical use contact with blood may affect the antimicrobial properties. This study aims to assess wheth...

The objective of this paper is to examine the possible use of new blended cements containing calcareous fly ash in structural concrete, potentially adequate for structural elements of nuclear power plants. The investigation included five new cements made with different contents of non-clinker constituents: calcareous fly ash, siliceous fly ash, ground granulated blastfurnace slag, and a referen...

During the hydration of cement, tricalcium aluminate (C3A) reacts with gypsum and forms ettringite (AFt). Once all gypsum is consumed, ettringite can further react with remaining C3A and form monosulfate (AFm) at 1–2 days. Normally, at early ages, ettringite all transfers to AFm phase. After several months or years, ettringite can form again if a new source of sulfate becomes available in the p...

Different mineral admixtures of Indian metakaolin, Iranian silica fume and nanosilica were used to produce high performance mortars. Two different sands types with grain size of 0.015-4mm were mixed with type II Portland cement, polycarboxylate superplasticizer,mineral admixture with 650kg/m3 cement content and water/cement ratio of 0.35. Different amount of cement was replaced by metakaolin or...

Exposure to Portland cement dust has long been associated with the prevalence of respiratory symptoms and varying degrees of airway obstruction in man. Apart from respiratory diseases, it was also found to be the cause of lung and laryngeal cancer, gastrointestinal tumours and also dermatitis. This study was done to investigate the effect of dust exposure on ventilatory lung function of Portlan...

In this paper, an ultrasonic shear wave reflection method was adopted to mimic the microstructural evolution of hydrating Portland cement pastes with different water/cement-ratios (0.35, 0.5 and 0.6) cured under a constant temperature of 25°C. The reflection coefficient measured with this technique was correlated to microstructural parameters of the cement pastes. The application of numerical s...