This report shares the feasibility study results of abrasive flow polishing of microbores of size φ500 μm or smaller and 25∼50 in aspect ratio for both metal and ceramic materials. A polishing device was designed and built up so as to create enough turbulence for facilitating the polishing at the inner walls of the micro-bore. Polishing of micro-bores on 3 materials: S45C, SS304 and Zr2O3 of le...

INTRODUCTION Debris buildup on the bracket-wire interface can influence friction. Cleansing brackets with air-powder polishing can affect this process. OBJECTIVE The aim of this study was to evaluate the frictional force and amount of debris remaining on orthodontic brackets subjected to prophylaxis with air-powder polishing. METHODS Frictional force and debris buildup on the surface of 28 ...

aim: Discolouration of direct composite resin restoration poses a significant aesthetic problem. This study compares the staining capacities of various beverages on direct composite materials, and compares the stain removing abilities of in-office bleaching using 38% Hydrogen Peroxide (Opalescence Boost) and re-polishing with Sof-Lex polishing system (3M ESPE). Materials & Methods: 180 composit...

This paper investigates the effects of material parameters optical glasses on polishing rate these glasses. For this purpose, removal various was determined in laboratory tests under identical conditions with respect to pad and suspension. The then evaluated for its dependence parameters. goal is derive a rule thumb which allows an estimation obtainable surface quality based certain workpiece c...

PURPOSE The aim of this study was to evaluate the surface hardness of six composite resins: Revolution, Natural Flow, Fill Magic Flow, Flow-it! (flowables), Silux Plus (microfilled) and Z100 (minifilled) before and after polishing at different times. MATERIALS AND METHODS For this purpose, 240 specimens (5mm diameter, 1.4mm high) were prepared. Vickers hardness was determined before and after...

Although computer controlled polishing (CCP) of aspheres and freeforms is one of the best understood state-of-the-art fab processes today, there are yet some unsolved issues: e.g. compared to bonnet polishing, fluid jet polishing is taking less iteration steps reaching the same form accuracy and ion beam figuring eventually is reaching much higher shape accuracies. This paper is a first move in...

Cavities and ageing leads to a higher demand for robust and durable dentures. Cobalt chromium dental cast alloys fulfill these requirements. After the casting, the alloys have to be thoroughly cleaned in an electrochemical dissolution bath. In the existing technology an expert has to control the polishing process. In this paper we present a fuzzy logic controller with 16 fuzzy rules, which comp...

Non-water based fixed abrasive polishing was adopted to manufacture LBO crystal for nano precision surface quality because of its deliquescent. Ethyl alcohol was selected as the non-water based slurry solvent and ethanediamine, lactic acid, hydrogen peroxide was added in the slurry as a chemical additive, respectively. Effect of different additives with non-water based slurry on material remova...

The specification for the total thickness variation (TTV) of the device layers on thick-film silicon on insulator (SOI) wafers tighten for future applications. Therefore, the bulk removal polishing process of current technology after grinding cannot meet the demands in terms of flatness. The currently required amount of material removal for polishing out the induced sub surface damage (SSD) of ...