The effects of metallurgical factors on the aqueous corrosion behavior of highentropy alloys (HEAs) are reviewed in this article. Alloying (e.g., Al and Cu) and processing (e.g., heat treatments) effects on the aqueous corrosion behavior of HEAs, including passive film formation, galvanic corrosion, and pitting corrosion, are discussed in detail. Corrosion rates of HEAs are calculated using ele...

Remitting seronegative symmetrical synovitis with pitting edema (RS3PE) is a rare entity mainly found in elderly males. It is characterized by pitting edema mainly of dorsum of both hands giving a "boxing glove hand" appearance; rarely involving feet also, acute in onset, negative rheumatoid factor and a good response to low dose corticosteroid therapy. Clinically it almost resembles a case of ...

Steel structures continuously exposed to offshore marine environments are prone to corrosion. This can be of major economic and perhaps of environmental significance. The risk of these scenarios occurring can be assessed using good quality data, good quality corrosion and pitting models and structural reliability assessment. Recently, improved models for the prediction of longer term corrosion ...

The understanding of corrosion behavior in NiTi is critical for the devices using this shape-memory alloy. In order to improve the surface properties of NiTi such as corrosion resistance, plasma source ion implantation (PSII) technique was employed with oxygen as incident ions at three levels of implantation dose (5x10(16), 1x10(17) and 3x10(17) ions/cm(-2)). Pitting corrosion and wear-corrosio...

The effects of the solution-annealing temperature on the precipitation of secondary phases and the associated pitting corrosion resistance in hyper duplex stainless steel after aging at 1123K were investigated in a highly concentrated chloride solution. Increasing the solution annealing temperature from 1333 to 1413K retarded the formation of the secondary phases owing to a decrease in both the...

the 17-4ph alloy is a martensitic stainless steel with 3–5 wt% cu, strengthened by the precipitation hardening. due to excellent mechanical properties, corrosion resistance and ease of heat treatment, this alloy has unique applications in nuclear power plants and marine constructions. in this paper, the influence of ageing heat treatment, solution annealing followed by ageing at 480, 550 and 62...

Pitting corrosion of rotating machinery is one the most common faults in industrial engineering. The convolutional neural network (CNN) increasingly applied to fault diagnosis. However, conventional CNN method will reduce feature dimension collected signal and cause loss information during pooling process. In this paper, a new based on dilated combined with spatial dropout (DCSD) proposed diagn...

In this paper, the corrosion residual strength of the AZ91D magnesium alloy in the presence of sulfate-reducing bacteria is studied. In the experiments, the chemical composition of corrosion film was analyzed by a scanning electron microscope with energy dispersive X-ray spectroscopy. In addition, a series of instruments, such as scanning electronic microscope, pH-meter and an AG-10TA materials...

Experiments about single pit initiation and propagation were performed on 316L stainless steel with the aim to determine the pitting corrosion behaviour for nuclear waste containers. The experimental setup permits to control the pit development at will and to create reproducible single pits in three dimensions. Radial and deep evolutions of a disc shaped pit were studied for propagation times o...