Reliable and durable asphalt surfacing systems still remain to be desired for the long-spanned orthotropic steel bridges as the nationally and internationally reports on distresses in deck pavement. Based on ten-year research works, this paper has presented a brief review and discussion of the Chinese practices and experiences of deck pavement on long-spanned steel bridges, including issues of ...

In this paper, a fiber Bragg grating (FBG)-based stress monitoring system instrumented on an orthotropic steel deck arch bridge is demonstrated. The FBG sensors are installed at two types of critical fatigue-prone welded joints to measure the strain and temperature signals. A total of 64 FBG sensors are deployed around the rib-to-deck and rib-to-diagram areas at the mid-span and quarter-span of...

A novel semi analytical method is developed for transient analysis of single-lap adhesive joints with laminated composite adherends subjected to dynamical loads. The presented approach has the capability of choosing arbitrary loadings and boundary conditions. In this model, adherends are assumed to be orthotropic plates that pursuant to the classical lamination theory. Stacking sequences can be...

Two classes of exact solutions are derived for the equations of three dimensional linear orthotropic elasticity theory governing flat (plate) bodies in plane strain or axisymmetric deformations. One of these is the analogue of the Levy solution for plane strain deformations of isotropic plates and is designated as the interior solutions. The other complementary class correspond to the Papkovich...

The problem of Stoneley waves in a non-homogeneous orthotropic elastic medium under the influence of gravity was studied recently by Abd-Alla and Ahmed [A.M. Abd-Alla, S.M. Ahmed, Stoneley waves and Rayleigh waves in a non-homogeneous orthotropic elastic medium under the influence of gravity, Appl. Math. Comput. 135 (2003) 187-200], who derived the secular equation of the wave in the implicit f...

In this paper, a method based on a combination of an optimization of directions of orthotropy, along with topology optimization, is applied to continuum orthotropic solids with the objective of minimizing their compliance. The spatial discretization algorithm is the so called Meshless Local Petrov-Galerkin (MLPG) “mixed collocation” method for the design domain, and the material-orthotropy orie...

Novel method for a determination of residual stresses in orthotropic composite plates based on local displacement measurements by electronic speckle-pattern interferometry is developed and verified. The values of hole diameter increments in principal residual stress directions serves as initial experimental deformation. The technique is based on analytical solution of S.G. Lekhnitsky, which des...

Ultrasonic polar scans are based on the recording of the reflected or transmitted amplitude of sound, impinging a fiber reinforced composite from every possible angle of incidence. The mechanical anisotropy of such materials makes the reflection coefficient direction dependent, whence an ultrasonic polar scan forms a fingerprint of the investigated material. Such scans have already proved to be...

Surface wrinkling occurs due to the mechanical instability induced by stiffness mismatch between a soft substrate and stiff film. In two-layer system comprised of thick compliant thin film, wrinkle pattern, as described wavelength, amplitude, orientation, is limited material properties thickness two layers. this work, an interface layer nanostructures fabricated glancing angle deposition (GLAD)...

The present investigation analysis a problem of r­­­eflection and transmission at an interface of two micropolar orthotropic piezothermoelastic media. The basic equations and constitutive relations for micropolar orthotropic piezothermoelastic media for G-L theory are derived. The expressions for amplitude ratios corresponding to reflected and transmitted waves are derived analytically. The eff...