Repetition-rate multiplication has been shown by use of a fiber ring oscillator with a semiconductor optical amplifier as the gain medium and by use of fast saturation and recovery of the amplifier from an external optical pulse train. Repetition-frequency multiplication up to 6 times and up to 34.68-GHz frequency have been achieved.

We generate linearly polarized, 287 W average-power, 5.5 ps pulses using a cryogenically cooled Yb:YAG amplifier at a repetition rate of 78 MHz. An optical-to-optical efficiency of 41% is obtained at 700 W pump power. A 6 W, 0.4 nm bandwidth picosecond seed source at 1029 nm wavelength is constructed using a chirped-pulse fiber amplification chain based on chirped volume Bragg gratings. The com...

In this thesis, we study all-optical processing techniques based on non-linear semiconductor optical amplifiers for the functionalities of second and third generation optical networks. In particular, devices for all-optical wavelength conversion with regenerative properties have been investigated. The configurations under investigation are based on the non-linear four-wave mixing process which ...

In this paper 16 channels DWDM system at 10Gbps has been investigated with Semiconductor optical amplifier at 0.8 nm channel spacing and the performance has been calculated on the basis of bit error rate, quality factor and optical output power. It is observed that the signal can be transmitted with acceptable BER and Q-factor using Semiconductor optical amplifier at low signal input power of -...

We present a fully integrated 12.5-Gb/s optical receiver fabricated with standard 0.13-µm complementary metal-oxide-semiconductor (CMOS) technology for 850-nm optical interconnect applications. Our integrated optical receiver includes a newly proposed CMOS-compatible spatially-modulated avalanche photodetector, which provides larger photodetection bandwidth than previously reported CMOS-compati...

The advantages of negative feedback are well known in electronics and extensively used in the operational amplifier. The properties of such a system are nearly independent of the parameters in the forward branch of the system; they are only determined by external elements in the backward branch. An optical analog of such an operational amplifier is reported. The essential operations, amplificat...

in this paper, we propose an optical millimetre wave radio-over-fibre (mm-wave rof) system that uses a dual drive mach zehnder modulator (dd-mzm), which is biased at the maximum transmission biasing point, to generate an optical double sideband-suppressed carrier. the input to the dd-mzm are binary phase shift keying (bpsk), quadrature phase shift keying (qpsk), 8-phase shift keying (8-psk) and...

The focal purpose of this thesis is to study chirality specifically in telecommunications area, through the pure chiral fibres (optical fibres constituted by chiral material) and chiral fibre grating (twisted optical fibre), analysing also its behaviour and applications. Nevertheless we shall also address this theme from an economical perspective. The study begins by giving a brief introduction...

The role of optical buffering in the development of all-optical cross-connects is discussed, followed by an analysis of fibre delay line implementations in optical buffers. It is shown that the traffic model plays an important part in the analyses of the systems, together with the traffic load, the use of internal buffer wavelengths, and the cross-connect architecture. Travelling buffers have s...

We demonstrate postselection free heralded qubit amplification for Time-Bin qubits and single photon states in an all-fibre, telecom-wavelength, scheme that highlights the simplicity, stability and potential for fully integrated photonic solutions. Exploiting high-efficiency superconducting detectors, the gain, fidelity and the performance of the amplifier are studied as a function of loss. We ...