Sonic velocities of geologic fluids, such as volcanic magmas and geothermal fluids, can be as low as 1 m/s. Critical velocities in large rivers can be of the order of 1-10 m/s. Because velocities of fluids moving in these settings can exceed these characteristic velocities, sonic and supersonic gas flow and critical and supercritical shallow-water flow can occur. The importance of the low chara...

The cold spray technology mainly accelerates the powder in Laval nozzle by gas, ensuring that has a greater velocity at exit of nozzle, and achieving high-efficiency deposition on substrate, thereby obtaining better performance coating. article uses numerical simulation to study influence length expansion section Dimet acceleration effect Al powder. results show is an essential factor affecting...

numerous investigations have been devoted towards understanding the hydrodynamics of gas jets in fluidized beds. however, most of them address the problem from  macroscopic point of view, which does not reveal the true behavior in the jet region at the single particle level. the present work aims to understand the jet behavior from a more fundamental level, i.e. the individual particle level. a...

in this article, an algorithm for designing of a supersonic wind tunnel injection nozzle ejector is presented and based on this algorithm, a new ejector is designed for a supersonic wind tunnel. the injection nozzle consists of a volute, a nozzle, and several vanes. designed injection nozzle is simulated numerically, and the results are compared with the present injection nozzle. the results sh...

Solution blow spinning (SBS) is an innovative process for spinning micro/nanofibers. In this paper, polyamic acid (PAA) nanofibers were fabricated via a SBS apparatus and then imidized into polyimide (PI) nanofibers via thermal process. The morphology and diameter distributions of PAA nanofibers were determined by scanning electron microscope (SEM) and Image Tool software, the processing parame...

An experimental and numerical effort was undertaken to assess the effects of a cold gas (To=300K) nozzle plume impinging on a simulated spacecraft surface. The nozzle flow impingement is investigated experimentally using a nano-Newton resolution force balance and numerically using the Direct Simulation Monte Carlo (DSMC) numerical technique. The Reynolds number range investigated in this study ...

Abstract—Liquid sprays of water are frequently used in air pollution control for gas cooling purposes and for gas cleaning. Twin-fluid nozzles with internal mixing are often used for these purposes because of the small size of the drops produced. In these nozzles the liquid is dispersed by compressed air or another pressurized gas. In high efficiency scrubbers for particle separation, several n...

The thermal stability of ribonuclease S (RNase S), an enzymatically active noncovalent complex composed of a 2166-u peptide (S-peptide) and a 11,534-u protein (S-protein), was investigated by electrospray ionization mass spectrometry (ESI-MS) and capillary electrophoresis ESI-MS (CE-ESI-MS). The intensities of peaks corresponding to the RNase S complex were inversely related to both the applied...

A system of models has been developed to study transient flow during continuous casting and applied to simulate an event of multiple stopper-rod movements. It includes four sub-models to incorporate different aspects in this transient event. A three-dimensional (3-D) porous-flow model of the nozzle wall calculates the rate argon gas flow into the liquid steel, and the initial mean bubble size i...

The exponential increase of industrial demand in the past two decades has led scientists to the development of alternative technologies for the fast manufacturing of engineering components, aside from standard and time consuming techniques such as casting or forging. Cold Spray (CS) is a newly developed manufacturing technique, based upon the deposition of metal powder on a substrate due to hig...